If I have a flash (version 11164.1) of xbox 360 XDK, but I can't get cpu key from the flash. Who can tell me how to composed a new cpu key to flash? Is this method direction feasible ? http://www.megaupload.com/?d=HKTSG8EH http://www.megaupload.com/?d=PNZN7AHJ
I have a xdk machine (version 9328), I want to flash the new flash to it(11164 flash to 9328 machine).
lmfao, i got a bit suss when i saw your post count and nick - if you don't have good contacts you will NOT get that recovery disk
So you have a NAND dump from a 11164 kit and you are wanting to flash it over your current 9328 flash?
Every Xbox 360 flash is encrypted with a device specific CPU key. Without said CPU key you cannot decrypt the flash image. You cannot get the CPU key from a system unless you are running a flash with a KNOWN exploit on the system itself. This is pretty basic, well documented stuff. What you want to do can't be done by any known means. -hl718
Yes you can do this. What everyone forgets is you only need to decrypt the kv for a console to console trasfer of the kv. Which you dont need in this case. Take the dump from the 9328 console, use nandpro to extract the kv and config blocks. Then using nandpro again, patch them into the 11164.1 image, and flash that to your console.
Heh, I'm not one for step by step instructions. I assumse the reader has the basic idea down. Also you may need to transfer crl.bin, secdata.bin and I believe odd.bin since they are all cpu encrypted files.
Posts deleted. If you don't like the fact that someone is sharing information about version numbers then post some detailed information of your own. If you just feel the need to start shit, then don't post. It's not a hard concept. -hl718