DIY Jamma adaptor boards?

Discussion in 'Arcade and Supergun' started by Auction_Sniper, Dec 14, 2009.

  1. Auction_Sniper

    Auction_Sniper Rapidly Rising Member

    Joined:
    Aug 2, 2008
    Messages:
    76
    Likes Received:
    9
    I have a Teddy Boy Blues board (I love this game!) and the connector is Sega System 1, can anyone recommend a good site to order some board adapters to JAMMA-tize older boards?
     
  2. ASSEMbler

    ASSEMbler Administrator Staff Member

    Joined:
    Mar 13, 2004
    Messages:
    19,394
    Likes Received:
    995
    I usually buy them off the forum guys on klov, the guy who sells the mvs to jamma adapters sells them cheap.
     
  3. retro

    retro Resigned from mod duty 15 March 2018

    Joined:
    Mar 13, 2004
    Messages:
    10,354
    Likes Received:
    822
    Don't forget this is an International site... you may want to state where you are or update that info in your profile... otherwise the recommendations for cheap places may become either very expensive due to shipping half way around the World... or they may not ship to you!
     
  4. channelmaniac

    channelmaniac Active Member

    Joined:
    Apr 20, 2008
    Messages:
    33
    Likes Received:
    0
    Check to see if Bob Roberts has them on his website. I don't know if he ships internationally though.

    I do ship worldwide, but JAMMA adapters are something I don't carry.
     
  5. Jamtex

    Jamtex Adult Orientated Mahjong Connoisseur

    Joined:
    Feb 21, 2007
    Messages:
    5,472
    Likes Received:
    16
    I bought a load of 56 way cards and a large number of edge connectors when I was in Taiwan, ended up costing about 40 cents each.
     
  6. retro

    retro Resigned from mod duty 15 March 2018

    Joined:
    Mar 13, 2004
    Messages:
    10,354
    Likes Received:
    822
    Ah OK, Australia. There's a cheap place there, but I forget the site. You're probably best off googling for JAMMA connectors or JAMMA fingerboards in your local version of Google.

    You'll need a fingerboard, JAMMA connector and whatever connector the other board uses, plus a reel of suitable wire.

    IIRC the site sold connectors for about £1 (which is about $2.50 I think?)
     
sonicdude10
Draft saved Draft deleted
Insert every image as a...
  1.  0%

Share This Page