Hi, i aquired a dtl-t10000 but i have problems by connect it to the linux workstation or prodg because i do not know the ip address, if i power-on the unit it show a screen with cubes and "TOOL" and not anything happen:shrug:,could someone could help me to startup and connect via ip-address?:-( Make sure that i have connect it to a unix and windows dhcp and no ip is gathered from the crosscable network.:crying: Regards Big Four
Search this forum for "TOOL" & you'll get a bunch of info from folks who've been there before you! This thread has a lot of the info you'll need (though it'll take a while to read thru it all, but it touches on everything you're likely to need to know): http://assemblergames.com/forums/showthread.php?t=13397&highlight=TOOL The cubes display you're seeing is it's default PS2 side display output - to setup/configure the TOOL for use, you'll probably first need to find the hidden VGA port at the back of the TOOL (it's under a metal plate, held in place by a couple of screws) & hook up a monitor & PS/2 keyboard in order to gain access to the linux interface directly. http://assemblergames.com/forums/showpost.php?p=216761&postcount=2
Problem Ok,Dear, i appreciate your help. we have a problem here, because there is not mouse and keyboard interface in the back of the DTL-T10000, only have VGA Out and PS2Out and a network card, then i can not understand something. If i connect anything to the VGA port nothing on the screen...have only cube on the tv.:crying: Regards Bigfour
Make sure you're connecting to the hidden VGA port. Before removing the plates the back of the TOOL should look something like this: http://www.gamechoiceclub.com/image/PS2_Tool2.gif After removing those plates, it'll be like this: http://assemblergames.com/forums/showpost.php?p=294203&postcount=6 See the additional VGA & PS/2 port that can be seen at the mid/bottom of the second image, next to the ethernet port? Those are what you need to hook up to.
Ok, plated removed OK,....cancel the previous message, i've removed the plate!YYYYYEESSSS, it appear RedHatLinux 5.2. Now i have user and password but now could you help me for programming knowledge?
