After following the instructions in the readme file. I was happy to successfully load up Kermit on the TOOL. The game install went flawlessly. but after starting the the ODEM. IOP gives this error. loadmodule: fname host0:~/SYSCLIB args 0 arg *** Unexpected reply - type=BREAKR code=ff result=EXCEPTION *** Target program stopped. Check the location by dr command. dsidb S> dr at=bf800000 v0-1=00000000,0000000e a0-3=00010da8,000085b4,00010dcc,0000002a t0-7=00000401,00000c04,00001000,00000f80, 00010000,0001edd8,00000021,00000001 s0-7=00000000,41c00000,00071da0,00070530, 00000000,00070500,00033c74,0001d7f0 t8=00003270 t9=00000009 k0=0000aea4 k1=00000000 gp=0001d7f0 sp=007fee38 fp=007fee78 ra=00002394 lo=00000001 hi=00000000 PC=00002320 bada=3efffbfb $cr=0x0000001c [ CE0 Bus error (load/store) ] $sr=0x00000404 [ IM0 IEp ] 0x00002318: 0x12200022 beq $s1,$zero,0x000023a4 0x0000231c| 0xafb00010 sw $s0,0x10($sp) ->0x00002320: 0x8e300004 lw $s0,4($s1) 0x00002324: 0x00000000 nop 0x00002328: 0x12000014 beq $s0,$zero,0x0000237c 0x0000232c| 0x0233102b sltu $v0,$s1,$s3 0x00002330: 0x0213102b sltu $v0,$s0,$s3 I hex edited the UNDL, and followed the readme word for word. So I now bring this to the forum any info much appreciated. maybe I missed something. but I've gone over it quite abit. EDIT: so deleting the SYSCLIB from my home directory seems to have made it work. The readme did state "make sure SYSCLIB is the same as in your TOOLs rom". The SYSCLIB was extracted from a rom file I personalty dumped from my TOOL. so not sure what happened.
If you use SYSCLIB from a retail 39001 bios. ODEM will work like a charm. I think you know where to download a retail 39001 bios and how to extract SYSCLIB from it.
