[GER] custom-made "Multi Jamma Adaptor" - XB, PS1/2, DC in one

Hi,
I'm selling my multi JAMMA adaptor because I'm not feeling that I'll ever put a console into my cab again. I once thought it would be great because I have a lot of ports, but I realized that I'd rather play them on an RGB monitor so I keep having space inside my cabinet. For someone with several cabs this might be more interesting than for me

Please read the "IMPORTANT"-part on the bottom!!!



It looks pretty chaotic, but the PCBs are actually all screwed to the wooden plate, everything, also the cables, is firm and doesn't wobble around.

There are two Controller cables for each: PlayStation 1/2, Xbox 1 and Dreamcast. You have to set up either of these consoles, plug in RGB & controller cables.
Two controllers for the same console are always connected to a small board that has be connected with a contact bank, pretty similar to a small JAMMA connector. To change consoles, you only have to switch RGB plugs and the controller connectors on the board, pretty simple.

It also provides a built-in AMP. You can control the volume right on the board, quite an advantage to those Hong Kong adaptors. I've had that thing for PS2 once and even if you turned the volume down on the cab, it was still uncomfortably loud.

The picture is perfect. Sharp and colorful RGB . I mainly played Daioujou and ESPGaluda and couldn't make out any differences to the picture quality of the PCBs.

IMPORTANT:
The can't get the controls to work. It's probably a very easy fix for someone with technical knowledge, sadly I don't have too much of it. As far as I can tell, there are no loose solderings. Some of the controls work, but in a weird way. For instance, the "up"-button in the PS2 layout can be pressed by setting the stick in the lower left corner and pressing A.
Something must be wrong with the button layouts (didn't try Dreamcast though), but as said, the soldering and wiring looks pretty tidy and well done and the adaptor had also already been used by the creator, so it must have worked once. Therefore I am quite certain that it has to be an easy fix. But of course, I'm lowering the price because of this circumstance.

Considering such great and comfortable adaptors are not that easy to find, let alone with an integrated AMP, I'm asking 89 USD / 57 GBP / 75 EUR + shipping from Germany. It weighs quite some kilos because of the wooden plate, to be prepared for some 2-digit shipping costs.

 

PM sent

 

Still available!
I'd also fancy a trade against something neat. No PAL games though, good US games for GC only or some nice Japanese imports for... just about any console!

 

Shipping costs wil be aroundl 25 GBP / 30$ (insured) to everywhere in Europe except Germany, which apprently is cheaper.

10% off if you take it today, the hottest day this Summer yet had to offer (in Germany)! =)

 

Pricedop! Someone buy this bulky thing, I need space 8)

 

maybe you should include some pictures from something like imageshack.us rather then the "Do not hotlink" pictures we see from directupload.net

 

Changed, thanks. I didn't notice that, directupload always worked fine with me. I've heard about Japanese internet users having problems with it though.

 

Still available!
I can also offer to disassemble the item from the wooden board. That way you would save about 70% of the shipping fees, it would probably result in approx. 15€ to everywhere in Europe or something like that.

Also: pricedrop to 69€ (feel free to convert).