Golden Genesis

Discussion in 'Modding and Hacking - Consoles and Electronics' started by PCB_Master, Nov 22, 2010.

  1. Alchy

    Alchy Illustrious Member

    Joined:
    Apr 6, 2004
    Messages:
    6,216
    Likes Received:
    19
    To be honest you'd be doing well to get a Megadrive to overheat to the point of component failure. Not a lot of heat coming out of that board. Fans seem like overkill to me, and an audible nuisance at that.
     
  2. MikeRWK

    MikeRWK Spirited Member

    Joined:
    Dec 6, 2010
    Messages:
    104
    Likes Received:
    0
    I wish i had a spare oven to do powder coating and thats the engine covers of my r32 skyline
     
  3. Disjaukifa

    Disjaukifa Intrepid Member

    Joined:
    Dec 6, 2010
    Messages:
    618
    Likes Received:
    3
    I was actually referring to a playstation 1 system, I never known a cartridge based system to have cooling issues . . . can say the same for disc based systems though . . .

    I think it would help extend the life of the laser in a playstation if I added additional cooling to it, might have to look at how much room I have on the inside and see where the best place to wire a fan would be . . .

    -Disjaukifa
     
  4. Alchy

    Alchy Illustrious Member

    Joined:
    Apr 6, 2004
    Messages:
    6,216
    Likes Received:
    19
    An internal fan could disturb the laser unit by moving the lens during use, or even by depositing dust depending on the angle of air flow. You'd also want to be careful where you tap the fan power so as not to stress the PSU.
     
  5. MikeRWK

    MikeRWK Spirited Member

    Joined:
    Dec 6, 2010
    Messages:
    104
    Likes Received:
    0
    Putting a fan in a psx is a waste, and unless it has the sucking power of a shopvac its not gonna move the laser, and it may suck in dust.
     
  6. Disjaukifa

    Disjaukifa Intrepid Member

    Joined:
    Dec 6, 2010
    Messages:
    618
    Likes Received:
    3
    I would actually direct the air out of the case, however I did not think about the stress it might put on the PSU which is kind of funny because the PSU is what I want to put a fan on. I was thinking that if I could have a fan near the PSU and "suck" the heat out of the case I wouldn't have to worry about the laser going bad as often.

    Anytime you are able to dissipate heat from electrical device is not a waste and depending on the air flow of the fan, you wouldn't have to really worry about dust.

    -Disjaukifa
     
  7. PCB_Master

    PCB_Master Rapidly Rising Member

    Joined:
    Nov 5, 2010
    Messages:
    98
    Likes Received:
    0
    The fan was barely audible, especially when the music of the game was playing.
    The only reason I put a fan in is because I would leave it on for long periods of time. I put it right on the vents, next to the heat sink.

    And yes, I know putting a fan in a Genesis is overkill.
     
  8. Solotaire

    Solotaire Rising Member

    Joined:
    Dec 11, 2010
    Messages:
    64
    Likes Received:
    7
    But you'll be set if you decide to overclock it! :lol:
     
  9. Disjaukifa

    Disjaukifa Intrepid Member

    Joined:
    Dec 6, 2010
    Messages:
    618
    Likes Received:
    3
    I've been wondering this ever since I read this post. Why would someone ever want to over-clock a Sega Genesis?

    -Disjaukifa
     
  10. Alchy

    Alchy Illustrious Member

    Joined:
    Apr 6, 2004
    Messages:
    6,216
    Likes Received:
    19
    Some games benefit from better CPU performance, with less slowdown etc. There's plenty to read on the subject using one of them new-fangled "search engine" things ;)
     
  11. Disjaukifa

    Disjaukifa Intrepid Member

    Joined:
    Dec 6, 2010
    Messages:
    618
    Likes Received:
    3
    I understand the concept of over-clocking and what it allows for I just had never heard of doing it for a console or video game system before other than the PSP, except for the PSP I believe you could under-clock it to get better battery life.

    -Disjaukifa
     
  12. Alchy

    Alchy Illustrious Member

    Joined:
    Apr 6, 2004
    Messages:
    6,216
    Likes Received:
    19
    Pretty much every console out there has been overclocked. Generally it works just like overclocking a PC CPU, in that it provides transparently better performance without you needing to modify any software. There are caveats, the NES for instance integrates CPU and PSG (the sound generator) onto a single die and both are fed with the same clock, so raise the CPU clock and the pitch also increases.

    Like I say though, there's loads of this shit out there if you're interested.
     
  13. Disjaukifa

    Disjaukifa Intrepid Member

    Joined:
    Dec 6, 2010
    Messages:
    618
    Likes Received:
    3
    I might look into doing some over-clocking on a Playstation one if I can find a spare unit . . . it would be nice if I could mod a system that also has the added benefit of having faster load times! I love the playstation 1 but it has some LONG load times . . .

    -Disjaukifa
     
  14. PCB_Master

    PCB_Master Rapidly Rising Member

    Joined:
    Nov 5, 2010
    Messages:
    98
    Likes Received:
    0
    In the Genesis, Do the 68000 and Z80 have separate clocks? I would like to overclock, but I don't want to mess up the music.
     
sonicdude10
Draft saved Draft deleted
Insert every image as a...
  1.  0%

Share This Page