jet force gemini (e) (m4) [f1] help

Discussion in 'Everdrive 64' started by dellrichi, Aug 18, 2012.

  1. dellrichi

    dellrichi Newly Registered

    Joined:
    Aug 18, 2012
    Messages:
    4
    Likes Received:
    0
    hello
    as the title says I try to run the rom of Jet Force Gemini (E) (M4) [f1] of principle works, but when you get to play and finished the drive into the character to the screen stays black
    everdriver cartridge 64 v2 with pal cic
    firware: 2.24
    os: 1.28
    and also tested with the patch-jfgcp Dx if the bad rom patched but does mimo
    Jet Force Gemini rom (u) [b2] is perfect
    but I want to play in Spanish and I want to play Jet Force Gemini (E) (M4) [f1]
    Is there any solution?
    thanks
    perodonar my translation use a translator
     
  2. KRIKzz

    KRIKzz Well Known Member

    Joined:
    Apr 5, 2010
    Messages:
    1,672
    Likes Received:
    2
    probably you should force sram save type for hacked rom
     
  3. dellrichi

    dellrichi Newly Registered

    Joined:
    Aug 18, 2012
    Messages:
    4
    Likes Received:
    0
    's been trying to force sram with the cartridge pressing L or R and continues to operate as
    I imagine it will be by the patch or quue region is Jet Force Gemini (E) (M4) [f1], because the Jet Force Gemini (u) [b2] is perfect
    thanks for the reply and your help
    if not an OS upgrade prosima be solved?
    is the only game you encounter problems
    thanks
     
    Last edited: Aug 19, 2012
  4. dellrichi

    dellrichi Newly Registered

    Joined:
    Aug 18, 2012
    Messages:
    4
    Likes Received:
    0
    curiosity
    so if me and realized in Jet Force Gemini (E) (M4) [f1] if you record heading even if you can play the game
    I think we also lack a new patch as happened in Jet Force Gemini (u) that took first [b1] then drew [b2]
    are curious if not help
    I count my experience of the checks and tested
     
  5. Zoinkity

    Zoinkity Site Supporter 2015

    Joined:
    Feb 18, 2012
    Messages:
    499
    Likes Received:
    108
    Do you have an 8MB expansion pak in the console? If you do, you have to swap it with the original jumper pak.
    Jet Force Gemini is one of only maybe 2-3 games that will not work with the 8MB expansion. I've half a mind to just make a patch to circumvent the problem. You could probably get away just falsifying the detected rdram size with a GS code: F0000319 0040 Might work. Might not. Never tried, actually.

    It also required a save crack, reducing the FLASHram save into an SRAM one. If you need that, it should be backed up here:
    PAL http://n64.icequake.net/mirror/www.dextrose.com/files/n64/cracks/Dx-jfgcp.zip
    NTSC http://n64.icequake.net/mirror/www.dextrose.com/files/n64/cracks/Dx-jfgc.zip
    That causes its own problems though, since FLASH is a lot larger than SRAM. First file will be fine, but later ones won't save properly/at all.
     
  6. dellrichi

    dellrichi Newly Registered

    Joined:
    Aug 18, 2012
    Messages:
    4
    Likes Received:
    0
    forgive my delay in answering
    I tested with the patches as I put my mind and the same, and I feel the same with the PAL version
    and I finally gave up and bought me the original e, 1 or 2 games ballan not what I'm going to give much impotancia and Mallorie imensa that game if it goes
    thank you all for your help
     
    Last edited: Sep 16, 2012
  7. angrylion

    angrylion Active Member

    Joined:
    Mar 15, 2008
    Messages:
    31
    Likes Received:
    0
    The problem is that the PAL patch wasn't well tested by LaC. It doesn't work with ED64 on a PAL N64 without Expansion Pak, regardless of save options, period. The game freezes when you land your spaceship into a giant basin. Even back then in 2000 there were no success reports about the PAL patch, as far as I remember. Also, notice how the release notes for the PAL patch were copied verbatim from the NTSC patch. Anyway, from the dextose.com archive:

     
    Last edited: Sep 17, 2012
  8. yourgamerman

    yourgamerman Member

    Joined:
    Apr 20, 2013
    Messages:
    12
    Likes Received:
    0
    Good news about Jet Force Gemini (E) (M4):

    NOW WORKS ON THE NEW 2.02 OS VERSION.

    No more freeze after Juno arrives the goolwood planet cutscene!

    that's true, trust me, check out my 2 photos Juno can Shoot and run on PAL (although the screen in my tv NTSC, is messed up, but i don't care), i tested in OS 2.02 Test6!

    Foto1542.jpg
    Foto1539.jpg



     
sonicdude10
Draft saved Draft deleted
Insert every image as a...
  1.  0%

Share This Page