Micro SD on PSPgo

You will need to remove the m2 port and solder using 30 awg kynar as your wire, there really isn't a clean way to remove the port so you will have to destroy it, be careful when removing it as you don't want to rip up the traces. (flux can help with this).

 

I can't see why not. I have one of those in one of my PSPs (the big kind) and it works just fine. Cost like $5 too, and the microSD cards were like $15 each.
Still hoping someone makes a MicroSD-Vita Card adapter (not likely at this point).

 

For the 30awg Kynar, This kind Is fine right?
http://www.ebay.com/itm/White-Kynar...595555?hash=item463d720de3:g:LW4AAOxyd8NSb6TG
For the Flux, is This ok?
http://www.ebay.com/itm/10g-New-Use...899812?hash=item35d8859524:g:iBYAAOSwd0BVtfFg
Destroying the port? wow... ahhaha ok I see,.... And after Soldering the wires to the mother board, um.... Do I like add the socket for the SDcard adapter or immidietly attach the Wires to the SDcard adapter? If possible can u show me pix of your psp go, like under the hood stuff? Thank you

 

Yah those should work as for a socket most people including myself just solder to the teeth of the sd card adapter.

 

Larger PS doesn't need any hack, there are MicroSD adapter for Memory Stick slot. And dual microSD too, I had 2x32GB at one time but went back to single 32GB because it was too much for my need. Many emulators and many roms doesn't come close to 32GB anyway.

 

Wow, I need to try this. My PSP GO is always docked and hooked up to the TV. Would be cool if the dual Micro SD memory stick worked with this. I used to run 2x64GB cards on my PSP 2000