Modding tools, programmers, soldering equipment, etc.

OK, I'm going to be moving around a fair bit before going to France for a year this September, so I'm trying to get rid of pretty much everything I own apart from my laptop and a few clothes. I've accumulated a lot of tools over the past years, which I thought I'd stick on here to see if anyone would be interested. Ideally I'd only post to the UK, but if anyone in Europe if interested I'll find out what postage will cost. Any further afield is almost definitely going to be cost-prohibitive.

The only item I would be prepared to split and sell separately is the soldering iron. Looking at £20 plus postage for the soldering iron or tools separately or £35 plus postage for everything listed. UK postage should be £8.29 by Collect+.

List of tools:
multimeter
dremel glue gun
2x wire cutters
torx screw set
3x protoboards
'hard as nails' glue
superglue
tinyUSB AVR programmer
masking tape
SP200S PIC programmer
K150 PIC programmer
EZ-USB FX2 dev board with removeable EEPROM
5x glue sticks
5x spudgers
37x screwdrivers, including triwings and gamebits.
tweezers
2x ATTiny2313
ATMEGA8
MX B012355
4x NRF24L01+ 2.4Ghz transceivers
2x 3.7V rechargeable li-polymer batteries
4x switches
60x breadboard jumper leads various lengths
5x diodes
small amount of heatshrink
45x LEDs
39x capacitors
solder
desoldering wick
stanley knife
scalpel
solder sucker
4x lighters
electrical tape
flux dispensing pen
Aoyue 936 soldering station

 

Sorry just noticed your price there. How have you found the soldering iron to use? I've been looking to get one for a while now but never knew what to get. If I can afford it this week I might take some items off you!

 

Those irons are fine, they are just a hakko clone. I use one similar.

If someone buys the iron on its own, I would pay £15 + shipping for the rest.

 

I previously owned an entry-level Weller and can't really tell the difference between them to be honest, although this might just be down to my soldering getting better. I've recently replaced the heating element on it, but never had any issues.

Bad_Ad, I'll probably be putting the iron on eBay if it doesn't sell here within the next few days, so I'll let you know about the rest of the stuff, although the MX B012355 is arguably worth £15 on its own.

 

I actually didnt see that in the list.

In that case, I will take the lot, minus the soldering iron for the stated £20 + shipping.

 

Are you taking the kit bad_ad? I'd be interesting in taking the lot as it could get me set up soldering without any other requirements. I wouldn't be interested in the iron on its own. Is there anything you're particularly interested in? I know there's a few items here you could make much better use of than me.

 

Obviously, I'd rather sell it as a lot, but it's up to Bad_Ad as he made a firm offer which needless to say, I'd be inclined to accept.

 

I will PM geluda with what I was actually interested in (which in honesty, isnt most of it) and see if we can work out a deal privately. If not, I would like to keep to my offer to buy the lot minus soldering iron.

Hopefully we can work something out between us and everyone be happy.

I only really want:

2x wire cutters
3x protoboards
tinyUSB AVR programmer
SP200S PIC programmer
K150 PIC programmer
EZ-USB FX2 dev board with removeable EEPROM
gamebit screw driver(s) (dont want the rest)
2x ATTiny2313
MX B012355
4x NRF24L01+ 2.4Ghz transceivers
2x 3.7V rechargeable li-polymer batteries
60x breadboard jumper leads various lengths

 

PM recieved, will talk with Bad_Ad.