Need some help with Power converter

I testing a master system power converter for the genesis but it does not work always get a black screen. When I opened to clean it the first part was fine but when I take out the second part, the one that goes to the genesis the magnet was broke and break another thing like a resistor. The photo show what I tell.


I need to know what is it. I going to desolder the part to see if it has a number.

Ok I take it out and it say on it something like
Z
E5

a symbol I dont recognize and the number
104

 

It's a ceramic capacitor, probably rated around 0.1 uF.

 

Apolloboy got it right, 104 means 10 and 4 (zero's) so 10 0000 or 100,000pF or 0.1uF.

If the symbol you don't recognise is the one under the capacitor (looks like 2 "T" s lying down) that is the symbol for capacitor. E5 would be the capacitor's number. Z no bloody idea.

Now for the lolz

 

indeed I found that is a 0.01uF, but can I use any ceramic cap. The Z apparently is a tolerance. But the question is can I use any disc ceramic capacitor or a multilayer cap that it look like the ones in the pic.

 

Any ceramic disc capacitor of the same capacitance (F) value sure.

 

thanks I hope that fix the damn problem. lol

 

It has a 104 code on it so it's actually 0.1, not 0.01. If it was 0.01 u,F it would have 103 on it instead.

 

Thanks apollo my mistake on numbers.