1. There have been major changes to the marketplace rules. Please read them again. The biggest changes involve image hosting, originality of items, and the number of infractions before ban. By dismissing this notification, you acknowledge awareness about the new guidelines.

US NORwegian Teensy NAND & NOR Reader/Writer (PS3 Downgrading)

Discussion in 'The ASSEMblergames Marketplace' started by Zeigren, Oct 8, 2017.

  1. Zeigren

    Zeigren Spirited Member

    Joined:
    Jan 19, 2014
    Messages:
    191
    Likes Received:
    124
    Currently Out of Stock - 1/30/2018
    I'll update this when that changes.

    NORwegian Teensy Clip Edition - $65 + Shipping (Your choice of pin headers or a screw terminal block for 3.3v and GND)

    [​IMG]
    [​IMG]

    The NORwegian Teensy Clip Edition is an easy way to read/write to TSOP56 NORs and TSOP48 NANDs using all the various clips out there. You don’t need to solder wires between clip daughter boards and the Teensy++ 2.0, just plug the clip directly into the appropriate connector and you’re good to go.

    It also has a built in 5v to 3.3v voltage regulator, so all you need is a 5v 2Amp USB phone charger in order to power everything.

    Features
    • READ/WRITE NANDS WITH THE E3 NOR CLIP
    • Read/write NORs with the E3 NOR clip
    • Read/write NANDs with the 360 clip (32 pin)
    • Read/write NANDs with the NAND UNI Clip (48 pin)
    • Read/write NANDs with the NOR UNI Clip (56 pin)
    • Read/write NORs with the NOR UNI Clip (56 pin)
    • Can be powered over microUSB with a 2 amp phone charger, no external power supply needed
    • Uses an L-C power filter as well as dedicated decoupling capacitors for each clip to provide clean and stable power
    • Utilizes the Teensy++ 2.0 in conjunction with judges NORway and NANDway Signal Booster Edition software to read/write NORs and NANDs
    • Has 3.3v power output headers
    Add a PJRC Teensy++ 2.0 Development Board ~ $30
    I'll install a Teensy++ 2.0 on the board for you.


    PRICE DROP: NORwegian Teensy Socket Edition - $35 + Shipping (Your choice of pin headers or a screw terminal block for 3.3V and GND) Dropped the price to what I paid for everything, maybe even less.

    [​IMG]
    [​IMG]

    It uses a Teensy++ 2.0 development board (sold separately) and NANDway/NORway by judges to read/write 48 pin TSOP NANDs and 56 pin TSOP NORs. It has been designed and tested with PS3 downgrading in mind, it may be able to read/write other NANDs and NORs but I've never tested this.

    Add a PJRC Teensy++ 2.0 Development Board ~ $30
    I'll install a Teensy++ 2.0 on the board for you.

    Relevant Thread
    https://assemblergames.com/threads/interest-in-ultimate-ps3-downgrading-kit.66765/

    eBay Seller Feedback

    GitHub io page
    Product/Hardware Page
    Shipping Info
     
    Last edited: Jan 30, 2018
    ricktendo and SONIC3D like this.
  2. Haider1975

    Haider1975 Member

    Joined:
    Jun 23, 2017
    Messages:
    8
    Likes Received:
    0
    Hoe much for the Clipversion including shipping
     
  3. Haider1975

    Haider1975 Member

    Joined:
    Jun 23, 2017
    Messages:
    8
    Likes Received:
    0
  4. Zeigren

    Zeigren Spirited Member

    Joined:
    Jan 19, 2014
    Messages:
    191
    Likes Received:
    124
    PM'd, also adding the clip edition to the listing now that they're back in stock.
     
  5. Karel Brukner

    Karel Brukner Newly Registered

    Joined:
    Dec 22, 2017
    Messages:
    1
    Likes Received:
    0
    Hi, could you send the NORBG Teensy Clip Edition + PJRC Teensy++ 2.0 Development Board to the Czech Republic?
    It is a country nearby to Slovakia :)
    How much would it cost to the shipping and how long it will last?

    Thanks for a quick answer.
     
  6. Zeigren

    Zeigren Spirited Member

    Joined:
    Jan 19, 2014
    Messages:
    191
    Likes Received:
    124
    Sent you a message.
     
sonicdude10
Draft saved Draft deleted
Insert every image as a...
  1.  0%

Share This Page