Playstation 1 JP21 Sync Stripper Question

Discussion in 'Modding and Hacking - Consoles and Electronics' started by Ghudda, Sep 27, 2016.

Watch Thread
  1. Ghudda

    Ghudda Rapidly Rising Member

    Joined:
    Sep 29, 2013
    Messages:
    86
    Likes Received:
    3
    Greetings!
    So I bought a sync stripper to install in my JP21 PS1 cable (I've been experiencing sync issues). I've hooked it all up, but am still experiencing the same sync issues. Could someone confirm that I have everything connected properly?

    [​IMG]
    [​IMG]
     
    Ghudda, Sep 27, 2016 Report
    #1 + Quote Reply
  2. bond.san

    bond.san Active Member

    Joined:
    Jun 25, 2014
    Messages:
    37
    Likes Received:
    5
    What was your original issue?
    Do you have a stock PSX SCART cable to replicate the original issue?

    Can you use a DMM to check your connections?
    Is the sync stripper connected to pin 11 on the PSX AV side and not after the 180 ohm
    resistor on pin 16 of the SCART cable?
    upload_2016-9-29_0-12-54.png
     
    bond.san, Sep 28, 2016 Report
    #2 + Quote Reply
sonicdude10
Draft saved Draft deleted
Insert every image as a...
  1.  0%

Share This Page