ps1 one chip help

Discussion in 'Modding and Hacking - Consoles and Electronics' started by sb1, Nov 9, 2013.

  1. sb1

    sb1 Rising Member

    Joined:
    May 6, 2012
    Messages:
    61
    Likes Received:
    0
    i just installed ia onechip and it works but only works with pal backups and proper pal games but imports do not work what points are used for patching the bios so i can checked i have checked all points and look ok

    after messing up 3 ps1s (all part of leaning) im gettin some where

    used this for points http://www.chipinstallation.dk/images/Onechip-stealth.jpg
     
    Last edited: Nov 9, 2013
  2. Zer0-2k11

    Zer0-2k11 Site Supporter 2012,2013,2014,2015

    Joined:
    Jul 18, 2012
    Messages:
    542
    Likes Received:
    20
    If my memory serves me right, theres 2 versions of ONEChip. The newer version of the ONEChip does patch the bios for import games but the older one doesn't. Do you buy the chip or did you program it yourself?.

    But we also need to see a pic of your install, it could be possible you have a cold joint
     
    Last edited: Nov 9, 2013
  3. sb1

    sb1 Rising Member

    Joined:
    May 6, 2012
    Messages:
    61
    Likes Received:
    0
    i got chip off bad ad think it was last year are early this year
     
  4. Zer0-2k11

    Zer0-2k11 Site Supporter 2012,2013,2014,2015

    Joined:
    Jul 18, 2012
    Messages:
    542
    Likes Received:
    20
    Ok, it should be the newer version. Its possible that 3 and 4 aren't soldered properly (Those points are the bios patching points that let you play imports).

    I could help you diagnose the problem more but i need to see a picture of your installation
     
    Last edited: Nov 9, 2013
  5. jinn

    jinn Peppy Member

    Joined:
    Feb 8, 2011
    Messages:
    396
    Likes Received:
    4
    Without install pictures is hard to know if the install is done proper.
     
  6. sb1

    sb1 Rising Member

    Joined:
    May 6, 2012
    Messages:
    61
    Likes Received:
    0
  7. Zer0-2k11

    Zer0-2k11 Site Supporter 2012,2013,2014,2015

    Joined:
    Jul 18, 2012
    Messages:
    542
    Likes Received:
    20
    Point 8 is just ground. Point 8 in your old diagram should be fine too.

     
    Last edited: Nov 9, 2013
  8. sb1

    sb1 Rising Member

    Joined:
    May 6, 2012
    Messages:
    61
    Likes Received:
    0
    will thanks for the help itz 2.40 am here will have a look at 3 and 4 2mo x2 if no joy will come back with some pics
     
  9. sb1

    sb1 Rising Member

    Joined:
    May 6, 2012
    Messages:
    61
    Likes Received:
    0
    right sorted it i solder point 4 wrong it was late lool and all works imports proper games and back ups but some times when it starts up i get like a ghost effect on the start up screen but by the time game loads it gos back to normal any idea why i get it ?
     
  10. sb1

    sb1 Rising Member

    Joined:
    May 6, 2012
    Messages:
    61
    Likes Received:
    0
    [​IMG]

    picture of the problem i got it don't do it all the time and when it does it stays on for 20 30 secs just timed the memory card and cd player screen then go back normal
     
  11. sb1

    sb1 Rising Member

    Joined:
    May 6, 2012
    Messages:
    61
    Likes Received:
    0
    pic is a bit crap but look at the top and bottom of diamond and there is like a blue line in the o of sony
     
  12. sb1

    sb1 Rising Member

    Joined:
    May 6, 2012
    Messages:
    61
    Likes Received:
    0
    Last edited: Nov 17, 2013
sonicdude10
Draft saved Draft deleted
Insert every image as a...
  1.  0%

Share This Page