Hi guy's got me a 2nd tool a T10000H A with the blue vga port so has the faster processor in how even upon powerup it just beep beep beep beep and nothing on the screen(s) tv or monitor yes i have pluged the vga into the vga port i tool the cover off to see if i could see anything loose but all looks good it's never been opened before as it had the copper tape holding the panel on and that was untouched and the screws were still sealed under the tape see for video with sound thanks in advance
Have you tried removing and re-seating the PCI card? I got a spare TOOL which was doing the same thing. I opened it up and everything seemed secure, even the PCI card seemed to be seated OK, but it still wouldn't boot. After removing and re-inserting the PCI card it booted up fine. EDIT Actually now that I think about it, I think it was the RAM that I had to remove and re-seat for it to boot.
having taken apart my working tool following the tool dissassembly bible and putting the old pci card in black vga socket into the new tool it boots no errors and i get vga out woohhoo so it seems the issue is somewhere on the newer pci card blue vga socket as that is the card that is beeping i have reseated the ram but that does not fix the issue so have to see what is causing the issue
