Quick question about laser model numbers...

Discussion in 'Sony Programming and Development' started by madhatter256, Aug 22, 2006.

  1. madhatter256

    madhatter256 Illustrious Member

    Joined:
    Mar 13, 2004
    Messages:
    6,578
    Likes Received:
    4
    I need to know a few things about the psx laser assembly and its model numers.

    Which model has the longest laser cable?


    Which laser assembly model (ie KSM 440ACM, etc) is of the highest quality? I remember that hte laser unit from the small PSOne is the best out of the bunch, is that true or is it some other model?

    ALSO. which part number is in the SCPH 5501 model?

    Thanks in advance!
     
    Last edited: Aug 22, 2006
  2. ConsoleFun

    ConsoleFun Gutsy Member

    Joined:
    Dec 21, 2004
    Messages:
    441
    Likes Received:
    3
    The KSM-440ADM and KSM-440AEM both have long laser cables.

    KSM-440ADM is found in:
    SCPH-5500, SCPH-5501, SCPH-5502, SCPH-5552
    KSM-440AEM is found in:
    SCPH-7000, SCPH-7001, SCPH-7002, SCPH-7003
    SCPH-7500, SCPH-7501, SCPH-7502, SCPH-7503
    SCPH-9000, SCPH-9001, SCPH-9002, SCPH-9003

    I would avoid the first models: KSM-440AAM and KSM-440ACM (both have short cabel). The rest are pretty good I think.

    I would use the PSOne KSM-BAM laser in the following models (for it to fit you need to replace the BAM's top cover with a AAM/ACM top cover):
    SCPH-1000, SCPH-1001, SCPH-1002
    SCPH-3000
    SCPH-3500
    SCPH-5000
    SCPH-5903
    DTL-H1000, DTL-H1001, DTL-H1002
    DTL-H1100, DTL-H1101, DTL-H1102
    DTL-H1200, DTL-H1201, DTL-H1202
    DTL-H3000, DTL-H3001, DTL-H3002

    KSM-440ADM, but you can use KSM-440AEM too.

    Cheers!
    CF
     
  3. madhatter256

    madhatter256 Illustrious Member

    Joined:
    Mar 13, 2004
    Messages:
    6,578
    Likes Received:
    4
    I'm bumping an oldddd thread here, but after trial and error the KSM-440AEM does not have a long enough cable for the SCPH-5501. So, the ADM has the longest cable. But there is a trick you can do to make the cable from the AEM reach for the laser connector on the SCPH-5501 model, but it involves removing the plastic cover.
     
  4. oldengineer

    oldengineer Familiar Face

    Joined:
    Jun 23, 2006
    Messages:
    1,083
    Likes Received:
    71
    ^ Handy to know.
     
sonicdude10
Draft saved Draft deleted
Insert every image as a...
  1.  0%

Share This Page