Hi, because i got another Partner-N64 Set i have to rebuild an KMC N64 console. I made for the users here a complete set of highress pictures from my REV-B KMC N64. You can find the dl at the end. I remember there is some tutorial out there, but you can also use this guide to build up your own KMC N64! You can use any NTSC N64, maybe PAL too?. After the modification you still able to play games with the unit. You have to disassembly your N64 console and solder the points you see in the pictures. On the upper side you see one cable behind the cartridge slot. This goes throw this point on to the top of the pcb: You can see that you have to cut something off for the cable. You can deplug the cart slot, and do some work on it. Than sloder this cable here: Now you have two other points to solder on the top of the pcb: Look on the other side where the cable come throw! You need small wire. and the last point here: You can find any pic as HIGHRESS DL here: http://ul.to/05vdktms The rar file has an pw. Leave me a short message and i will send you the pass. Hope this will help someone out there. :thumbsup: Have fun with your rebuild KMC N64!
I know this thread is super old, but is it possible to get a re-upload of the high res images? Also, if not already included, is it possible to get a higher res image of the KMC label on the console? Thanks.
Dunno if you still need this but here’s the label on mine... Image didn’t attach to this post for some reason, see below
