PLEASE CONFIRM THE REVISION OF YOUR BOARD VS SCHEMATIC! FOR EXAMPLE- THE MODEL 1 MEGA CD IS FROM AN EARLY REVISION AND MAY NOT MATCH YOUR CONSOLE! Here are some Sega Service Manuals.They were scanned from COPIES from the original manual NOT the original manuals. These will be good for repair and general information. There are 2 versions that have been scanned and in 2 sizes, A4 and A3. Print both sizes out in the required size, refer to the index and bind/staple as necessary. 1/PDF 600dpi greyscale for best detail and are near 1/1 copies from the photocopies, file size is bigger and best for printing 2/TIF 600dpi b/w are smaller in file size and are 90-95% of what the original photocopies are. Good for a quick download. Sega Master System PDF https://www.dropbox.com/s/s0p0vtbdek1a9yh/Sega Master System Service Manual part 1 of 2 A4.pdf https://www.dropbox.com/s/pog5x5imnpznlhl/Sega Master System Service Manual part 2 of 2 A3.pdf TIF https://www.dropbox.com/s/16iiv8z7v4cf8n2/Sega Master System Manual 1 of 2 A4.tif https://www.dropbox.com/s/3riq0lkmpeduvkv/Sega Master System Manual 2 of 2 A3.tif Sega Master System 2 PDF https://www.dropbox.com/s/zcu6vthw7s5f5x7/Sega Master System 2 1 of 2 A4.pdf https://www.dropbox.com/s/atmxf9l9iey5wmt/Sega Master System 2 2 of 2 A3.pdf TIF https://www.dropbox.com/s/pgcq3m2kg1t4en0/Sega Master System 2 1 of 2 A4.tif https://www.dropbox.com/s/snpkrl1dr7vyap6/Sega Master System 2 2 of 2 A3.tif Game Gear VA1 PDF https://www.dropbox.com/s/zurty3r7xm0tg9y/Game Gear VA1 1 of 2 A4.pdf https://www.dropbox.com/s/gjezw8h1tnmpxe4/Game Gear VA1 2 of 2 A3.pdf TIF https://www.dropbox.com/s/hn2hosb5munkq9j/Game Gear VA1 1 of 2 A4.tif https://www.dropbox.com/s/25ksxjeim95nd31/Game Gear VA1 2 of 2 A3.tif Game Gear TV tuner PDF https://www.dropbox.com/s/dufrqext4pafxxh/Game Gear TV 1 of 2 A4.pdf https://www.dropbox.com/s/81146qh22vxr4i7/Game Gear TV 2 of 2 A3.pdf TIF https://www.dropbox.com/s/9abf9anlfx7l5cp/Game Gear TV 1 of 2 A4.tif https://www.dropbox.com/s/afeix76rq8dw76c/Game Gear TV 2 of 2 A3.tif Sega Mega Drive 2/Genesis 2 VA0 PDF https://www.dropbox.com/s/xmpyr6s3sfvdbdf/Sega Mega Drive VA0 1 of 2 A4.pdf https://www.dropbox.com/s/9i308o5o9ugbgqe/Sega Mega Drive VA0 2 of 2 A3.pdf TIF https://www.dropbox.com/s/bqmr78zn0ba7rko/Sega Mega Drive 2 VA0 1 of 2 A4.tif https://www.dropbox.com/s/za4ga33iz5k8xm7/Sega Mega Drive 2 VA0 2 of 2 A3.tif Sega Mega Drive 2/Genesis 2 VA1 PDF https://www.dropbox.com/s/59y712rjcm2nf8n/Sega Gen2 & MD2 Supp VA1 1 of 2 A4.pdf https://www.dropbox.com/s/m6qfhn44yr15o9w/Sega Gen2 & MD2 Supp VA1 2 of 2 A3.pdf TIF https://www.dropbox.com/s/q4gidaarwko26ta/Sega Gen2 & MD2 Supp VA1 1 of 2 A4.tif https://www.dropbox.com/s/5r9sl8m793mmgz3/Sega Gen2 & MD2 Supp VA1 2 of 2 A3.tif Sega Mega Drive Supplemental (A4 only no A3 size for this) PDF https://www.dropbox.com/s/pberq84qepz3vjp/Sega Gen 2 & MD2 Supplement A4.pdf TIF https://www.dropbox.com/s/2ng2kfrplo0iz32/Sega Gen 2 & MD2 Supplement A4.tif Sega IC Specifications (Genesis VA7, Mega Drive PAL VA6.5 and Mega / Sega CD) A4 only PDF https://www.dropbox.com/s/xu20gldi8hda2j1/Sega IC specifications A4.pdf TIF https://www.dropbox.com/s/pmylako9pn9eibb/Sega IC specifications.tif Sega 32X VA0, VA1 PDF https://www.dropbox.com/s/7d6gdle1o5bnl6p/Sega 32X 1 of 2 A4.pdf https://www.dropbox.com/s/jwdudmytjoaws57/Sega 32X 2 of 2 A3.pdf TIF https://www.dropbox.com/s/v4z3rg13dqpc7uz/Sega 32X 1 of 2 A4.tif https://www.dropbox.com/s/pxegh4hbj435pnd/Sega 32X 2 of 2 A3.tif Sega 32X Service Bulletin A4 only PDF https://www.dropbox.com/s/qfrhf8vm3bfjfbd/Sega 32X service bulletin A4.pdf TIF https://www.dropbox.com/s/p00b6akf47jlt0z/Sega 32X service bulletin A4.tif Mega/Sega CD PDF https://www.dropbox.com/s/bx642uy6plm8e3q/Mega CD 1 of 2 A4.pdf https://www.dropbox.com/s/dgohlexn6k23va9/Mega CD 2 of 2 A3.pdf TIF https://www.dropbox.com/s/l48r2r6cz3s60xm/Mega CD 1 of 2 A4.tif https://www.dropbox.com/s/traika5izmcppkd/Mega CD 2 of 2 A3.tif Mega CD 2 Service Manual PDF https://www.dropbox.com/s/h1teg5wila8izn7/Mega CD 2 Service Manual 1 of 2 A4.pdf https://www.dropbox.com/s/nsng4b0iyzyztj1/Mega CD 2 Service Manual 2 of 2 A3.pdf TIF https://www.dropbox.com/s/95jxuiqg3g9kchn/Mega CD 2 Service Manual 1 of 2 A4.tif https://www.dropbox.com/s/as1vwjhtsgnj6cd/Mega CD 2 Service Manual 2 of 2 A3.tif Mega CD 2 Supplement PDF https://www.dropbox.com/s/mqt25i8ltn9u9i4/Mega CD 2 Supplement 1 of 2 A4.pdf https://www.dropbox.com/s/mwfpyccsbj5w1ll/Mega CD 2 Supplement 2 of 2 A3.pdf TIF https://www.dropbox.com/s/kjowdoef3py1d86/Mega CD 2 Supplement 1 of 2 A4.tif https://www.dropbox.com/s/48cprqiwvepeoci/Mega CD 2 Supplement 2 of 2 A3.tif Mega CD Additional information PDF https://www.dropbox.com/s/ucw86dc11af2pkf/Mega CD 2 Additional Infromation A4.pdf TIF https://www.dropbox.com/s/zyy80f1qbyd5rmm/Mega CD 2 Additional Infromation A4.tif Sega Saturn MK-80200-50 PDF https://www.dropbox.com/s/0mzue75b6... No.013-1 issued june 1995 part 1 A4 size.pdf https://www.dropbox.com/s/d4mkxd7p9...13-1 issued june 1995 part 2 of 2 A3 size.pdf TIF https://www.dropbox.com/s/2r5xx2n5a...13-1 issued june 1995 part 1 of 2 A4 size.tif https://www.dropbox.com/s/awxdma4vj...13-1 issued june 1995 part 2 of 2 A3 size.tif
The fellow forum member has translated more of the Mega CD manual for us. (I have included all what they have done to keep it all in one place). When all this is done, I will have a crack at putting it into word with all the (albeit crappy) pictures. If I do a shit-house job I don't mnd passing the banner over. ----------------------------------Page #41---------------------------------- Checker Specifications Ver.2 Model: MEGA-CD CHECKER /PART No. 610-0276 SEGA Checker Specifications Model MEGA-CD Checker Part No. 610-0276 Published: CS Product Engineering Dept. Person in Charge - Ogawa Section Head - Otsuji Manager - Takayasu Department Head - Matsumiya Igarashi 992 - 4/30 Ver.0.95/ Created: 92/04/27 -1- SEGA ENTERPRISES, LTD. ----------------------------------Page #42---------------------------------- Checker Specifications Ver.2 Model: MEGA-CD CHECKER /PART No. 610-0276 1) Contents 1) Contents 2 2) Overview 3 3) Setup 3 4) Check Flow 3 5) Operating Procedure 6 6) Error Messages 12 7) Other 14 8) Safety Procautions 17 9) Appendix 18 10) Revisions 23 Ver.0.95/ Created: 92/04/27 -2- SEGA ENTERPRISES, LTD. ----------------------------------Page #43---------------------------------- Checker Specifications Ver.2 Model: MEGA-CD CHECKER /PART No. 610-0276 2) Overview During the mass production of this product, "MEGA-CD", this Checker's function is to take electrical measurements (voltage-to-current, and frequency) of the IC board's power, and to diagnose issues which have resulted in the failure to operate normally. 3) Setup This product (the "MEGA-CD JIG Checker, hereafter referred to as "CD Checker"), generally speaking, consists of a Mega Drive (retail unit), CD Checker board, CD Checker JIG, CD Checker Test Box, TV Monitor, Control Pad (also Control Switch). When placing the Mega Drive into the CD Checker Test Box, please disassemble the unit and use only the internal circuit board. For information on each component, refer to the CD Checker List "610-0267". For wiring and connections, refer to the CD Checker Schematic, "610-0267". 4) Check Flow The Checker Flow (inspection procedure) can be split into two parts. The first stage handles simple signal-variation and basic functionality checks, such as short circuits in the power line, various voltages, current, frequency measurements, basic Mega Drive access, MEGA-CD internal CPU (SUBCPU) and MEGA-CD gate array (MCE), substrate-functionality checks for basic operations and electrical checks for external sections. The second stage runs two concurrent programs to conduct a detailed self-checking routine (functions check) to check the various MEGA-CD's functions through the Mega Drive unit's internal CPU (MAINCPU) and SUBCPU. In other words, short circuits in the power line, data, address and control-signal path line shorts, etc. Functionality that can lead to substrate or CD Checker damage, unresponsive states and other unexpected behaviour, is excluded from the first-stage procedures, and so the second stage includes a detail checks to isolate the problematic areas, such as which IC pin or resistor is defective. Ver.0.95/ Created: 92/04/27 -3- SEGA ENTERPRISES, LTD. ----------------------------------Page #44---------------------------------- Checker Specifications Ver.2 Model: MEGA-CD CHECKER /PART No. 610-0276 Check Flow (Normal Check Mode: DIP-SW1, 2 All ON) POWER ON ↓ Default Settings and Initialise ↓ Version Display ↓ Check-Start Screen ↓ ↓ :First-Stage Check ↓ Short(-circuit) Check ↓ POWER-ON Check :TR-SW ON/OFF, POWER ON, System Reset ↓ Path-Short(-circuit) Check ↓ Program-Access Check ↓ OS ROM Verification Check ↓ Communciations-Command Check ↓ SUBCPU-Interrupt Check :CPU, MCE Basic Operation and Signal Change ↓ Backup RAM Check :Backup RAM Data Save, Backup Voltage, Signal Check ↓ Power Supply to the Check Board OFF ↓ Backup Check :Backup Voltage, Signal Check ↓ Power Supply to the Check Board ON ↓ Backup RAM Check :Backup RAM Data Verify ↓ Various-Voltage Check ↓ Various-Frequency Check ↓ ↓ ↓ :Second-Stage Check WORD RAM 1M DMA :Visual Check of Screen ↓ WORD RAM 2M DMA :Visual Check of Screen ↓ Rotate-Screen Check :Visual Check of Screen ↓ Program-Access Check rogram-Load Check ↓ Main Register R/W Check ↓ Communication(s)-Board R/W Check ↓ System-Reset Check ↓ LED Board Check :LED Flashing ↓ Memory-Protect Check ↓ Backup RAM R/W Check ↓ PCM RAM R/W Check ↓ WORD RAM R/W Check :1M Mode and 2M Mode ↓ 1M Mode Swap Check ↓ WORD RAM Z80 Access Check :Not used for Ver.0.01 or higher ↓ Stopwatch Check ↓ Timer Check ↓ Colour-Calculation Check ↓ Graphic-Calculation-related Register (Resistor?) Check ↓ Graphic Calculation Check ↓ CD Drive Check :Test TOC output check, DMA from CDC cache RAM ↓ Sound Check I :Check sound-out from Mega Drive Expansion Slot ↓ Sound Check II :Check sound-out from MEGA-CD RCA Jack ↓ Defective or Acceptable (Item) Display ↓ Repeat from Check-Start Screen *) Abort test(s) immediately if defect is found. Ver.0.95/ Created: 92/04/27 -4- SEGA ENTERPRISES, LTD. ----------------------------------Page #45---------------------------------- Checker Specifications Ver.2 Model: MEGA-CD CHECKER /PART No. 610-0276 Check Flow (Factory-Side-Check Mode: DIP-SW1 Nr. 5 only OFF) POWER ON ↓ Default Settings and Initialise ↓ Version Display ↓ Check-Start Screen ↓ ↓ :First-Stage Check ↓ Short(-circuit) Check ↓ POWER-ON Check :TR-SW ON/OFF, POWER ON, System Reset ↓ Path-Short(-circuit) Check ↓ Program-Access Check ↓ OS ROM Verify Check ↓ Communications-Command Check ↓ SUBCPU-Interrupt Check :CPU, MCE Basic Operation and Signal Change ↓ Backup RAM Check :Backup RAM Data Save, Backup Voltage, Signal Check ↓ Power Supply to the Check Board OFF ↓ Backup Check :Backup-Voltage, Signal Check ↓ Power Supply to the Check Board ON ↓ Backup RAM Check :Backup RAM Data Verify ↓ Various-Voltage Check ↓ Various-Frequency Check ↓ ↓ ↓ :Second-Stage Check↓ Program-Access Check rogram-Load Check ↓ Main-Register R/W Check ↓ Communication(s)-Board R/W Check ↓ System-Reset Check ↓ LED-Board Check :LED Flashing ↓ Memory-Protect Check ↓ Backup RAM R/W Check ↓ PCM RAM R/W Check ↓ WORD RAM R/W Check :1M Mode and 2M Mode ↓ 1M Mode Swap Check ↓ WORD RAM Z80-Access Check :Not used for Ver.0.01 or higher ↓ Stopwatch Check ↓ Timer Check ↓ Colour-Calculation Check ↓ Graphic-Calculation-related Register (Resistor?) Check ↓ Graphic-Calculation Check ↓ WORD RAM 1M DMA :Visual Check of Screen ↓ WORD RAM 2M DMA :Visual Check of Screen ↓ Rotate-Screen Check :Visual Check of Screen ↓ CD Drive Check :Test TOC output check, DMA from CDC cache RAM ↓ Sound Check I :Check sound-out from Mega Drive Expansion Slot ↓ Sound Check II :Check sound-out from MEGA-CD RCA Jack ↓ Defective or Acceptable (Item) Display ↓ Repeat from Check-Start Screen *) Abort test(s) immediately if defect is found. Ver.0.95/ Created: 92/04/27 -5- SEGA ENTERPRISES, LTD. ----------------------------------Page #46---------------------------------- Checker Specifications Ver.2 Model: MEGA-CD CHECKER /PART No. 610-0276 5) Operating Procedure 5 - 1) Initialising When using the CD Checker for the first time, after a prolonged period, or with a new RAM BD, please follow the points below to initialise the system for safe operation. Each step comes with an explanation. ① Follow the steps in section 2, Setup, to add the CD Checker into the system. ② Set DIP-SW2 No. 2 on the CD Checker MAIN BD to OFF (all other switches should be set to ON) ③ Switch the CD Checker power ON. The Version-Display Screen (diagram 5 - 1) will be displayed on the TV monitor followed by the Check-Start Screen (diagram 5 - 2). When on this screen, press the A Button while pressing and holding up on the control pad (control switches cannot be used). ④ The display will switch to the Menu Screen. (diagram 5 - 3). Move the cursor up and down using the up and down direction on the control pad, navigate to the "Initialise System" option and press the A Button. ⑤ The message "The system will now be initialised… Is this okay?" will be displayed (diagram 5 - 4). To proceed with the initialisation, press the A Button. Alternatively, press the C Button to return to the Menu Screen (diagram 5 - 3) and cancel the system initialisation. ⑥ Pressing the A Button in step ⑤ and the screen will change to display "Analog Comparison Voltage Adjustment…" (diagram 5 - 5). From here, rotate the VR1 on the CD Checker's MAIN BD and the CD Checker's voltage LED will light up. Adjust the voltmeter until "3.00" (±0.01) is shown. ⑦ Press the A Button and the message "System Initialisation Complete…" (diagram 5 - 6) will be displayed. Follow the instructions and turn the CD Checker's power OFF and DIP-SW2 No. 2 ON. This completes the CD Checker initialisation. NOTE #1: The CD Checker saves the Check Data to RAM BD on the MAIN BD. Initialising the system will erase this data entirely. NOTE #2: When following the instructions in step ⑦ and turning the CD Checker's power OFF, you'll first be returned to the Menu Screen (diagram 5 - 3). Pressing the C Button here, navigating to "Check-Start" and pressing the A Button will take you back to the "Check-Start Screen", and the power can now be turned OFF. <LEFT-HAND DIAGRAM> ---------------------------------------- MEGA-CD Checker Ver.*.** **** MODE ---------------------------------------- Diagram 5 - 1 Version-Display Screen <RIGHT-HAND DIAGRAM> ---------------------------------------- MEGA-CD Checker Please set the Check Board START: Check Start Up, A, B, START: Force Quit ---------------------------------------- Diagram 5 - 1 Check-Start Screen Ver.0.95/ Created: 92/04/27 -6- SEGA ENTERPRISES, LTD. ----------------------------------Page #47---------------------------------- Checker Specifications Ver.2 Model: MEGA-CD CHECKER /PART No. 610-0276 <TOP-LEFT DIAGRAM> ---------------------------------------- Check Operation Settings Confirmation Rotary Switch Settings Confirmation Initialise System Change History No. Check Results Report Check Start ---------------------------------------- Diagram 5 - 3 Menu Screen <TOP-RIGHT DIAGRAM> ---------------------------------------- The system will now be initialised. All data and statuses will be erased. Is this okay? A Button: Run C Button: Cancel ---------------------------------------- Diagram 5 - 4 <BOTTOM-LEFT DIAGRAM> ---------------------------------------- Analog Comparison Voltage Adjustment Rotate VR1 left and right until the voltmeter reads 3.00V. A Button: End ---------------------------------------- Diagram 5 - 5 <BOTTOM-RIGHT DIAGRAM> ---------------------------------------- System Initialisation Complete. After turning the system OFF, turn DIP-Switch2 S2 ON. A Button: Confirm ---------------------------------------- Diagram 5 - 6 5 -2 ) Inspection Procedure The CD Checker inspection consists of two items: this first is the program to automatically judge the results of the check results to determine if things are nominal or not, the second to allow the person checking to determine if the sound output from the CD Checker's MAIN BD is functioning properly or not and to assess the status of the TV monitor. When errors occur or are found by the automatic check, the operation will immediately stop and an error message with an error code will be displayed (see section 6, "ERRor Messages" for details). The inspection procedure for Normal Check Mode, Factory Check Mode and Factory Check Mode run from Quick Check Mode are explained below. Ver.0.95/ Created: 92/04/27 -7- SEGA
People I was "asked" on another forum to re-do the PDF's in a lower resolution to get the file size down. I have done this via Adobe Pro. The links are on Sega-16 if I could have a volunteer have a look and share your thoughts. I may replace the Tiffs (even though I spent all that time doing the blasted things) with these lower resolution PDF's. I don't want my dropbox full of the same thing. Cheers Pete
I am currently in the (slow) process of reproducing the A3 schematics for the Mega CD 2. It will take me a while to do, as it will be done in my spare time. I am after volunteer's to do checking once I am done with it. Preference to someone who has either the Samsung or Sony laser equipped model since that is what the schematis is based on. I will be checking on mine, but I would prefer another person to do it as well. I will be drafting this on (at a guess) 4-6 sheets for clarity (try and get text size 2.5mm minimum but preferably the standard 3.5mm minimum). Again there will be a wait, maybe up to and past 1 month as it is quite involved trying to interpret the smudged text and following the circuit on my console.
Regarding the japanese pages in the Mega CD manual, after having looked through the schematics, I would say the most interesting ones to get translated would be the 10 pages manually marked as p.68 to p.78, which describe the inputs and outputs of the custom ASIC (315-5548) as well as some of the timings used when communicating with other chips. The remaining ones are about the Sega CD checker program procedures (for which the test CD and/or cart are not available anyway, at least publically) or common chips datasheets that already exist online in English.
Thank you for that. The fellow forum member is still translating parts as he can, I would feel awful to get him to stop now or should I?
honestly, i would say that translating the whole program procedures is a lot of work for something that nobody is probably going to be able to test or use, but I might be wrong (maybe there are people out there who got this Sega CD Checker thing and would love to understand what it does ?) those ten pages however appears to hold important informations about how the system internally works, which is kinda useful for emulation (or eventually technical repairs) and seems (relatively) easier to translate
Uploaded all manuals on my server. Because some stuff sometimes die in the internet. ftp://ftp.valet2.com/sega_service_manuals/
I have a link to the JVC X'Eye service manual for purchase if anyone comes through here looking for it. http://www.jvcservice.com/Service/JPartInq.asp?PgReq=DspDta&PrtNbr=NO.20478
Hi. Can anybody upload the schematics of the board 171-6528C-A? I've looking for it along Internet and I coudn't found anything. The boards in this thread, for example, don't have capacitors C307 or C308 and I haven't got C920. I'm desperate because I bought a dead Mega CD, which have missed the diod D301 and the fuse F301. I soldered the two components blindly (the traces of the board around these components are also destroyed) and it already don't works. Please, help me...
How much of the rest of the schematics match? Components that aren't necessary might've been left off at the factory without anyone updating the schematics.
This was the board when I received, after some little fixes: cleaned burned areas, removed some tin, and soldered C308 capacitor, that was partially pull out (I also suspect is burned): [GALLERY=media, 561]DSC_2559 by Yus posted Dec 1, 2015 at 6:08 PM[/GALLERY] Later, I fixed the fuse: [GALLERY=media, 562]DSC_2569 by Yus posted Dec 1, 2015 at 6:20 PM[/GALLERY] I have tried placing one diode in many positions: in R304+anode+F301 and cathode in the little metal point (in other side), R304+cathode+F301 and anode in the little metal point...etc. But in any form works. I don't know if I should make a new thread. Thanks. Edit: I've created a thread http://assemblergames.com/l/threads...his-sega-cd-mk-4102a-171-6528c-a-board.59121/
Some more of these sold a few months ago for quite cheap, unfortunately I noticed way too late. Bolded the unscanned ones in the context of the known numbered service manuals; NO. 001 - ISSUED JUNE, 1993 - GENESIS II / MEGA DRIVE II (PAL-B/I/G, RGB) NO. 001-1 - ISSUED AUGUST, 1993 - GENESIS II / MEGA DRIVE II (PAL-B/I/G, RGB) - SUPPLEMENT NO. 001-2 - ISSUED DECEMBER, 1993 - GENESIS II / MEGA DRIVE II (PAL-B/I/G, RGB) - SUPPLEMENT (VERSION 1) NO. 001-3 - ISSUED AUGUST, 1994 - GENESIS II VA3 NO. 002 - ISSUED AUGUST, 1993 - SEGA CD II / MEGA CD II NO. 002-1 - ISSUED NOVEMBER, 1993 - SEGA CD II / MEGA CD II - SUPPLEMENT NO. 002-2 - ISSUED JUNE, 1994 - SEGA CD II / MEGA CD II - SUPPLEMENT NO. 004 - ISSUED DECEMBER, 1993 - GAME GEAR VA1 NO. 005-2 ISSUED MARCH, 1995 - KIDS COMPUTER PICO (PAL) NO. 008 - ISSUED MARCH, 1994 - GENESIS CDX / MULTI-MEGA NO. 010 - ISSUED APRIL, 1994 - GENESIS - MEGA DRIVE PAL - MEGA CD/SEGA CD NO. 012 - ISSUED JUNE, 1995 - GENESIS 32X(VA0,VA1)/MEGA DRIVE 32X NO. 013-1 - ISSUED JUNE, 1995 - SEGA SATURN (PAL) NO. 013-4 - ISSUED JANUARY, 1996 - SEGA SATURN (NTSC/PAL VA0/VA1) - SUPPLEMENT NO. 013-8 - ISSUED AUGUST, 1996 - SEGA SATURN VA9 (PAL) NO. 016 - ISSUED OCTOBER, 1995 - VIDEO CD CARD (PAL)
