Serious Problem connecting DTL-H2510 to DTL-H2000

Hello ! i ran into a serious problem with connecting the Data cable of the DTL-H2510 to the DTL-H2000 card becoz i dont have the cable

i only looked at the DTL-H2000 and brought a 68pin female -female LVD cable (yes they exist) from work i connected the one end to the DTL-H2000 card and unassembled the DHL-H2510 drive just to see ..... there is no 68 pin connector on the drive but a 50pin VHD connector .....

i am now guessing such a cable is hard to come buy ;(

but still if anyone has one for sale or knows how to make em (pinout?) please get in contact with me ...

i thank you

 

Stupid question: is it the same as a SCSI cable? I only ask since they come in 68-pin to 50-pin varieties so one of them may serve. Whatever you do don't hook it up without checking though ;-)

Stone

 

the 68 pin is a VHD68 ... LVD cable fits ... the 50 pin is the same contact spacing as the 68pin ....

68VHD to 50VHD cable i havent seen these scsi cables (yet)

also the cable needes is FEMALE-FEMALE ... so this is another problem

i was realy lucky we had a 68-68 female female around but now i see it doesnt FIT ;( ;(

 

The internal cd-rom can't be used with the dtl-h2000 ISA kit, only with the PCI version (dtl-h2500).

 

Shit - that's my fault, I just sold VR all my old Sony PS1 dev kits. Should have said. You'll need the external kit. I might still have one, if I do I'll bung it to you FREE of charge as I never gave the internal CDrom a seconds thought...

P ;-)

 

humm thanks for clearing this unclejun

guess i m screwed

 

Only until the external device turns up! ;-)

 

well that should connect where ?????

 

vr, you only have the dtl-h2000 kit?

 

i assume there some more connector card or breakout kit missing

i love it


here is: DTL-H2000 and the card beneeth thats connected via the very short "i think" 100 pin flat cable

so where should an external drive connect?

 

Yeah, which I totally forgot as I had several boards and sold them all off. Somewhere someone has an external, when they should have had an internal. As I say, my mistake, which I shall rectify. Still a great deal as the external drive I have sent you was worth £70 alone. As far as I am aware everything else other than the video cable is all that is now required for those versions of board, but I ended up with the newer version and abandoned that project - as discussed at point of sale.

 

who has a DTL-H2010 for me ? PARRIS

@Parris: i just want to get this thing working / or at least complete !