SGI Indy U64 R5000 IRIX 6.5 missing mountpoint

Discussion in 'Repair, Restoration, Conservation and Preservation' started by Jackhead, Sep 25, 2012.

  1. Jackhead

    Jackhead Site Soldier

    Joined:
    Apr 2, 2008
    Messages:
    2,433
    Likes Received:
    610
    Hi,

    I have some time to investigate my Indy with a Ultra64 board (rev2.0) installed. The system has two HDD on the SCSI bus. When i boot up the indy i got the follow message:

    [​IMG]


    [​IMG]

    The Syshdd booting up fine. I checked the scsi connection, anything OK. Next step i try to remount the second drive, with no luck.
    Maybe some N64 proto is on the second HDD...

    [​IMG]

    Looks like the disk is still there. Maybe the second is formatted, because the data on it. Can anyone assist?
     

    Attached Files:

    Last edited: Sep 25, 2012
  2. jollyroger

    jollyroger Gutsy Member

    Joined:
    Oct 18, 2008
    Messages:
    458
    Likes Received:
    256
    Your best bet might be to pull the drive, connect it to a SCSI adapter and dump/analyze the raw contents from a PC.
    You can then use a few XFS tools that are available on Linux to see if you can recover some contents; on Irix there is little available for that purpose...
     
  3. swcdx

    swcdx Spirited Member

    Joined:
    Jan 26, 2009
    Messages:
    180
    Likes Received:
    0
    Does the directory /mountpoint actually exist ? The error looks to me like the mountpoint, not the disk, is missing...
     
  4. mikeryan

    mikeryan Active Member

    Joined:
    Aug 2, 2010
    Messages:
    45
    Likes Received:
    0
    Definitely a missing mount point, disk is probably fine. From a root shell, run mkdir /mountpoint.

    Also, paste contents of /etc/fstab here.
     
sonicdude10
Draft saved Draft deleted
Insert every image as a...
  1.  0%

Share This Page