SNES Power Issues...

Discussion in 'Repair, Restoration, Conservation and Preservation' started by jimbomillerk, Aug 8, 2013.

Watch Thread
  1. jimbomillerk

    jimbomillerk Member

    Joined:
    Nov 22, 2011
    Messages:
    8
    Likes Received:
    0
    Hi,

    I'm having issues with my SNES that is not powering up. I've probed the circuit board with a multimeter and there is no power getting past the component in position T1 marked 'TDK ZJYS-2'.

    By the powers of google I've found a similar component with the part # ZJYS51R5-2P, which appears to be some kind of voltage filter. Would this be a suitable replacement?

    Any help would be much appreciated!

    Thanks,
    Jim
     
    jimbomillerk, Aug 8, 2013 Report
    #1 + Quote Reply
  2. Pikkon

    Pikkon "Moving in Stereo"

    Joined:
    Mar 4, 2005
    Messages:
    2,695
    Likes Received:
    80
    Did you check the fuse or the voltage regulator.
     
    Pikkon, Aug 9, 2013 Report
    #2 + Quote Reply
  3. jimbomillerk

    jimbomillerk Member

    Joined:
    Nov 22, 2011
    Messages:
    8
    Likes Received:
    0
    Yes, these are both fine. The fuse had blown which I changed for a new one. When the SNES still didn't power on I assumed it would be the regulator & replaced that as well. However, that still didn't fix the problem so I decided to get the multimeter out and found there was no voltage getting past T1.
     
    jimbomillerk, Aug 9, 2013 Report
    #3 + Quote Reply
sonicdude10
Draft saved Draft deleted
Insert every image as a...
  1.  0%

Share This Page