So my head set broke again lol.

I have had this microsoft head set for about a month about a week ago I dropped it and then I found that the mic started messing up so I was a able to jiggle and bend the wire to fix it. Then today it up and broke down all together so I jiggling the wire for 3 hour I decided it didn't matter how bad of a solderer I am I will try to fix it so It took me about and hour to desolder the mic wires and then about 30 minute to solder another pair. So after I had a cookout with the board I got it back together I found that with the new wires would fit so I would need to modify the case, lazily I burnt holes in the plastic and sanded. got it together retested it to my surprise it worked better than when I bought it. So after I was done I hot glued it all up and here it is Me so proud :

 

x

 

Crappy /g/ copypasta incoming

 

Good eye , I had a chemical burn when I was a child mixing lye , sulfuric acid and paint thinner. I have almost no feeling in my right hand. Since the lye was in it there wasn't to much skin damage and it healed fast and most people don't notice. There is alot nerve damage, but it didn't leave to much scar tissue.

 

Did you make that or just pull it out of your ass. btw those headset won't work as I have a shitty mic jack. Besides usb is better quality.

 

It's a popular image from /g/.

And USB headphones -aren't- better quality than audio jacks and if you were after quality you'd be using a dedicated sound card.

Chances are if your audio jacks are shitty you're using the front panel ones which are nefarious for having crappy shielding. Use the back ports.

 

+1

 

Not sure if you're being sarcastic or not because that came out stupid because I was tired. I actually meant USB headphones weren't better than the ones that plugged into the audio jacks.