Tutorial, presenting, reparing SEGA SATURN PROLOGUE 21

Discussion in 'Repair, Restoration, Conservation and Preservation' started by GOREFESTOR, Jan 6, 2018.

  1. GOREFESTOR

    GOREFESTOR Rising Member

    Joined:
    Dec 22, 2010
    Messages:
    69
    Likes Received:
    40
    Hello,
    If it interests someone, I've made for the SEGA Super Prologue 21one post in another forum presenting, working manual, disassembling, reparing etc... with lot of pictures. >>> In French sorry ^-^.

    http://darius-saturn.com/forum/viewtopic.php?f=163&t=8018

    And also movies:
    01 - Prologue and Saturn Splash screens.

    02 - Test CD charger system SKW-2000A.

    03 - Test CD charger system SKW-2000A.

    04 - Lots of working test and presentation a.

    05 - Lots of working test and presentation b.

    06 - Saturn part working test.
    https://youtu.be/5sQXKbEie4k
    07 - Working test with sound repared.
    https://youtu.be/o3kSjdYhRa8
    08 - Final demonstration with repared system.
    https://youtu.be/octWn7XU3CM

    Regards,
    Jacques

    [​IMG]
     
  2. DeChief

    DeChief Rustled.

    Joined:
    Jan 25, 2014
    Messages:
    1,704
    Likes Received:
    712
    Thank you for making these! I have an SKC-1000 and an SKC-1000C that I'm going to try fixing soon, your videos will be very helpful. :)

    @AUSTIN PEYTON check this out fam.
     
    AUSTIN PEYTON likes this.
  3. GOREFESTOR

    GOREFESTOR Rising Member

    Joined:
    Dec 22, 2010
    Messages:
    69
    Likes Received:
    40
    I add an new complete movie made today.
     
    AUSTIN PEYTON and jollyroger like this.
  4. GOREFESTOR

    GOREFESTOR Rising Member

    Joined:
    Dec 22, 2010
    Messages:
    69
    Likes Received:
    40
    Finally, mo5.com association dumg my prologue scsi hdd with his fully working os and lots of song. I hope they put it online for helping to revive the last others prologue referenced over the world.

    The fail of the hdd it's the principal problem of this system. Whithout it, is not starting and clearely also, the Saturn part don't boot. With this dump and scsi ti sd it can be foud on the web, the prologue can works.
     
    AUSTIN PEYTON likes this.
  5. AUSTIN PEYTON

    AUSTIN PEYTON Gutsy Member

    Joined:
    May 22, 2016
    Messages:
    402
    Likes Received:
    212
    I have a question gorefestor
    My skc 1000 has these tabs holding the faceplate down IMG_3257.JPG

    Do I have to put a lot of force or should they just slide right off?
    I tried for a good 30 minutes and could not get the front faceplate off
    Thanks
     
  6. GOREFESTOR

    GOREFESTOR Rising Member

    Joined:
    Dec 22, 2010
    Messages:
    69
    Likes Received:
    40
    Hello, Very simple, follow pictures.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Only screws.
    Regards
     
    AUSTIN PEYTON likes this.
  7. AUSTIN PEYTON

    AUSTIN PEYTON Gutsy Member

    Joined:
    May 22, 2016
    Messages:
    402
    Likes Received:
    212
    Ok I figured it out
    For future SKC 1000 owners press down on the top of the faceplate and get under neath with your finger while applying a good amount of force on the top to get the metal tabs out of the plastic channels underneath especially the second one.
    I made a picture for the more visual learners
    It does require a bit of wiggling and force
    Thanks gorefestor :)
     

    Attached Files:

  8. GOREFESTOR

    GOREFESTOR Rising Member

    Joined:
    Dec 22, 2010
    Messages:
    69
    Likes Received:
    40
    Exelent explaination and well made draw !!
     
    AUSTIN PEYTON likes this.
sonicdude10
Draft saved Draft deleted
Insert every image as a...
  1.  0%

Share This Page