[UK] Xbox 360 Slim XDK Test Kit

I have a 360 Slim Trinity XDK up for sale at the minute. This console comes with internal memory but no HDD. Any 2.5" Hdd can pug in though and your good to go.
To keep costs down im selling unit without power brick and controller for £200 shipped in the UK. If your looking for international shipping please send me a message and i will happily check it out for you.
If you really need the power brick and/or pad, pm me also as i might be able to dig a set out but it will effect the final price.






Some extra pics here, dated and trying my best to show any scuffs and scrapes on the console shell.

















If anyone has any doubts over the legitimacy of the console i can make and upload a short video of the console running a recovery disc if needed.


Thanks for checking out the thread!

Please note - All signs point to this console being a prototype although 360 flash dump tool reports it as Trinity XDK Final.
Id hate for anyone to think im trying to miss lead or over sell the console, im by far no expert like others that have posted in this thread so please read check out what others have said about the kit and decide from there.
I am more than happy to answer any question or even consider trades of the unusual/development kind.

 

It's legit. I have three of these and the circle-hole with stress test cables and leds on mobo prove enough its real.

Is this the standard PSU hole or is it the proto square shaped hole?

 

Thanks for the confirmation. Yes i noticed the hole is a lot tidier than on previous fat kits where it seemed there were just retail cases cut with wire cutters.
Standard PSU fits this one fine, using one from a retail on it at the minute.

And almost forgot, i took the top off to expose the sidecar wires for the thread, i do have the cover though and it will be included.

 

You require a date on your name paper in the photos...

May I request total price with shipping to Australia and power supply?

 

Nice. Yeah there is an older proto that has a funny shaped PSU port that you CAN shove a retail into but it takes some doing. I ask just because that same unit takes a weird shaped HDD.

 

Ha i thought i covered everything... and i go and leave out the date... ill get those pics updated in a few hours with a date on them. Looking at shipping to Australia, theres a couple of options i just used a guestimate of the weight being around 3.5Kg so it maybe slightly more slightly less but as a guide...

Economy 3+ days £259 shipped with a power brick
TNT 1-3 days £279 again shipped with brick.

Let me know if you need me to get an exact price, its just after 5am here so ill can get that all sorted tomorrow.

I checked the HDD bay with a standard retail cartridge and it slots in and works fine. I also dumped the nand and cpu Key and 360 flash dump tool recognises the dump as Devkit Trinity Final Model 512MB. These backups will be included with the kit when sold

This does seem to be a standard 512mb RAM console also as there does not appear to be any option relating to 1gb mode.

 

An exact price will be good, so I'm able to know if I can go through with it or not.

 

Pm'ed price and updated photos, its hard trying to get good pics of a glossy shell!

View attachment 9694

And the final photo, couldnt add any more to op. This time with the Top lid on so the side car cables are not exposed.

 

If i'n mot mystaken, only prototye kit have glossy case.

Can you open the kit, it should look like that.

 

Ive just taken a look at opening it and ive gave the black plates a gentle tug and they seem snug. Although this console has no seals id hate to open it without knowing for sure it had been opened before.
If its absolute must for the sale then i will open it and get pictures, but id hate to do it for just curiosity.

 

It doesn't look exactly like that. The outside of the prototype is glossy, while the final kit (the one that can take a slim sidecar) is matte. Here is a video of my older of the two with the odd plug. The second one I have, beside the outer psu hole being exactly like retail, the insides are the same. I'd be willing to bet his would look the same.

 

In this video the HDD slot seems larger than retails. Mine seems the same as retail, this console does not make any eject or power on noise.

 

Yeah the other slim proto I have has the retail shaped hdd slot. The one in the video has the rounded early proto hdd.

 

vouch for good old wan5, How you doing buddy

 

Long time no speak Tom, the usual same shit different day! You will have to give me a shout on msn/skype sometime

Edit: Kit on hold for a member here.

Edit 2: Kit available again.

 

SOLD

Ill let the new owner introduce himself if he wishes.

 

If I had the money I would have bought this straight away! Congrats to the new owner!

 

These wire on the top of the dev kit whether on the Slim or Orignial 360 to what do you connect them?

 

Why are we necromancing a dead/sold sales thread?

They're stress cables that connect to something referred to as a "Lamprey" that allows the nand to be read and flashed on the fly by internal devs.