[US][FS] CK Sell-a-thon

[US][FS] Chipped PS2, Chipped GC, CFW PSP, NDS

I only accept PayPal, and I'll only accept buyers within the United States. The buyer is to pay for the shipping, I'll more than likely be using USPS to ship, with shipping insurance. I am located within Kentucky, just incase anyone wants to know the general area in which I reside.

Please allow at least 3 days for me to get everything shipped out once paid for, PM me if you would like to purchase anything.



100 USD

GameCube Console: Modified with XenoGC chip, pal display on the menu
only, odd issue with some of the chips. I tweaked the pot to 205 ohms, so it'll read burnt media perfectly now.

Also, the case I had wouldn't allow for all the screws to fit properly, so if you want to buy it, I'll include the spare screws inside a baggy. Everything is pretty sturdy though, shouldn't be damaged during shipping.

Will come with the power cable, av cable, one black controller, and one memory card.



120 USD

PlayStation 2 Console: Modified with Modbo 4.0 chip, 1.99 firmware. Never had an issue out of it, a few scuffs on the case, nothing big. SCPH-90001.

Will come with the power cable, av cable, one controller, one PS2 memory card, and one PS1 memory card.



135 USD

PSP 2001 Console: Piano black, modified with CFW 6.37 ME5. I'll throw in an 8 GB memory stick with it and the charger.

The console itself is a little dirty, maybe a few scuffs on the casing of it, nothing serious. I haven't noticed any dead or stuck pixels since my purchase of it, but I've only played a couple games on it, and was done with it. I purchased it originally used from Gamestop, so it still has the Gamestop sticker on the back.



60 USD

Nintendo DS Lite Console: Onyx black

It has a couple finger prints here and there, no dead pixels from what I can tell, if there are, they aren't noticeable. It'll include the stylus and the charger.

 

might want to mention the XenoGC is a 2.0 (those had the XenoShell with PAL 50hz - this was never fixed) and that it looks like it has a nice full size disc case replacement - is it top and bottom complete or just the top half?

 

Yeah, it's a XenoGC 2.0. It's a full case replacement that fits DVD-R.

 

I'm interested in your Gamecube/PS2 but you're priced before the recession. Any chance of a decent price drop? Gamestop sell the PS2's preowned for $60..

 

Game stop doesn't sell preowned consoles with modchips..

 

Touche.

 

But surely the modchip isn't worth 60 bucks...

 

PM'd about the DS. Awaiting reply

 

The case was quite expensive, cost of soldering in the chip, cost of the chip, etc. The price is pretty good I'd say. If you're so interested in a modified GC and don't like my price, just buy a XenoGC from ASSEMbler and solder it in yourself.

Have you ever soldered a modchip into a PS2? If not, you probably wouldn't get it working your first time doing it. If you lack solder experience, I'd suggest paying a little more for a pre-modified console.

 

But the PS2 mods and GC mods are very different.
GC mods have upto 6 wires in large-padded areas, the PS2 mods require you to lift pins off ICs and whatnot. They can't really be compared.

 

GC mods are easy to do, PS2 mods are easy to mess up. Heck, I was under the influence of a hallucinogen when I did the GC mod.

 

Bump, this stuff has to go, I need some quick cash to go out and buy a PS3. I'm willing to do a trade for a PS3 160 GB slim in good condition, non-updated. Name your conditions.

- C-K

 

Bump, edited the sale page with some updated information. PM me if you would like to purchase anything, I probably wont notice any posts in the topic.

 

Bump, lowered some of the prices and adjusted the descriptions. PM me if you want to buy.