WTB: Psy-Q SCSI card

Need one that matches EITHER of the two versions below:

Thanks!

Prefer US only, but will work with international if no others show up...
Payment by PayPal

-dan

 

dunno- that's the pic from PSYQ2.PDF ( the manual for the external playstation psy-q)
i'm guessing it's the same card as the 32x one based on general design, but i'm unsure...

 

The Saturn the 32X and the Playstation ISA card are the the same the SNES and the Mega drive one is diffrent!

 

Pictures showing the diffrences on the Mega drive/Mega CD ISA interface

 

Sorry Just going by the manuals the cards look the the same in the saturn and playstation one. Been doing some research recently but thats answered one of my questions about the 32X being a completely different card Thanks!

 

I think he is looking for it.

http://www.assemblergames.com/forums/showthread.php?t=20953

 

ASSEMbler, Could you please look for the software for that card? It must be a PSY-Q FD disk. May be you have one somewhere.

I need a PS-X version.

 

Is this the Playstation Board which is mine It came from the same sale???

If so if anyone has a Mega Drive/32X board we could do a big swap and every one will be happy!

 

Assembler- your mention that the Playstation (and saturn cards) include emulation makes me wonder- Do you know if this would do it:

It came from the same auctioneer as IcarasNick's above, who I also got the external cart off of (for which i need above diagrammed card according to the docs).

The odd part is that mention of DIP switches... I can't say I've ever seen a picture of a psy-q card with dips before, just the all-too-familiar jumpers.

If you think the emulation off the normal internal emulation card I have might do the trick, I'm willing to try it if no known alternate with dips is known of...

I agree- it seems odd that a "scsi" card wouldn't have proper "scsi" output and would instead damage something.... and a device that expects a "scsi" card would be wired differently as well... especially when i'm seeing industry standard 50 and 25 pin connectors here.

 

In looking at the advertisements posted on the first page over in the serial accessories thread, it looks like the card IcarasNick has is the one shown.

If you have a spare one that matches, Assembler, I'd gladly buy it off you- loose is just fine as well. Local US shipping is always a nice benefit.

 

Or if you have the 32X or the Mega Drive card I will sell mine to Defor at the same price then everyone gets what they need!

 

I do appreciate the offer, but I'd be open to offers as well for just the card as discussed.. I had mentioned Assembler as He's said a few times that the card you have, I believe he has more than just doubles of- than and he'd be far closer and faster to ship to me.

We'll see, regardless.

Open to other offers as well.
Thanks

EDIT-
further documentation strengthening the argument that the basic yellow card should do fine- In the bbs docs I ran across a document stating that actually just about any scsi card as long as it's using a specific NCR chipset should work.

 

Just been talking to the seller and he confirms just what you said the card I have works with both Playstation and Mega Drive kits he has used it for basic sprite routines.

Good luck in finding what your after

Now I'm off to find me a 486 motherboard with 16 bit ISA slots.

 

I'd point you in the direction of this thread http://www.assemblergames.com/forums/showthread.php?t=12217
so you don't have to suffer through a 486

 

I like suffering I've just finished fixing my Playstation Tool

http://www.assemblergames.com/forums/showthread.php?t=25710

I'm old enough to remember how to use a 486 and it looks like I need MSDOS 3.1 the fun is in the challenge!

 

So, back to the topic on hand- I need either a DIP model OR the one IcarusNick has shown in this post.

Anyone? (preferably in the US)

thanks!

 

I've got this one here:



This what you're looking for? Hit me up with a PM if you have a dollar amount in mind and we can more than likely work something out.