XDK Power Supply question:

Discussion in 'Xbox 360 Development' started by storm132, Aug 8, 2015.

  1. storm132

    storm132 Site Supporter 2016

    Joined:
    Jul 11, 2014
    Messages:
    137
    Likes Received:
    56
    Hey guys!

    Just bought a Jasper XDK with Sidecar and PSU. The problem is that the PSU is rated for europe, and I live in the UK :L

    After reading about standard Xbox 360 PSU's, I've found out that the UK and European versions run at the exact same frequency and voltage, but the UK plug has a 10A fuse fitted to it, whilst the European one doesn't include that.

    My question is this:

    - If i replace the plug for the EU powerbrick with the UK one, will it fry the PSU? I don't know the difference between dev PSUs and retail, but I'd assume that they were similar if not the same (Just with higher wattage and fuse for UK version)?

    I'd rather use the actual cord rather than a socket adaptor as I've been told that they really do have a chance at frying the PSU.

    Thanks for reading!
     
  2. ddxcb

    ddxcb Gota J.T.A.G. That Xbone Yo.

    Joined:
    Apr 17, 2008
    Messages:
    388
    Likes Received:
    45
    the xdk w/ sidecar needs the 213w psu. im not sure if the plug can be swapped out but the system needs the 213w to run.
     
  3. Stipo360

    Stipo360 Dead Rising & XDKs

    Joined:
    Feb 11, 2014
    Messages:
    1,107
    Likes Received:
    473
    uh yeah i think the U.K devkit PSU is rated differently than the US, and swapping the plugs could blow the unit. Not 100% sure but would not recommend
     
  4. storm132

    storm132 Site Supporter 2016

    Joined:
    Jul 11, 2014
    Messages:
    137
    Likes Received:
    56
    Sorry, you mis-understand. Its an EU PSU coming from France, and I'll be using it in the UK. EU and UK PSUs are rated very similarly in retail Xbox 360 PSU's, with the exception being a 10A fuse fitted to the UK plug. I realize that swapping the plug for a US powerbrick would be kinda stupid, considering how different the supplies are rated :p

    Here's the rating for EU: Europe (Austria, Belgium, France, Germany, Greece, Netherlands, Portugal, Spain) = 230V @50Hz
    and
    Here's the rating for UK: United Kingdom and Ireland = 230V @50Hz fitted with a 10-amp fuse.

    Taken straight from here: http://support.xbox.com/en-GB/xbox-360/system/power-supply

    Whats your opinion on the matter?
     
  5. deep3r

    deep3r Fiery Member

    Joined:
    Feb 6, 2011
    Messages:
    855
    Likes Received:
    301
    Will be fine mate, same voltage, no transformer needed or anything, I've had xboxes come from all over Europe (with same voltage respectively) and used the PSUs that came with them.
     
  6. Stipo360

    Stipo360 Dead Rising & XDKs

    Joined:
    Feb 11, 2014
    Messages:
    1,107
    Likes Received:
    473
    whoops, read it all wrong. sorry bout that
     
  7. storm132

    storm132 Site Supporter 2016

    Joined:
    Jul 11, 2014
    Messages:
    137
    Likes Received:
    56
    Not a problem ;)

    Ended up taking Deep3r's advice and used an adaptor. Everything works fine!

    Hopefully this might be useful to someone down the line who was in the same position I was in :).
     
sonicdude10
Draft saved Draft deleted
Insert every image as a...
  1.  0%

Share This Page