DVT3 including Recovery and SDK Set

All sold! Thank you!

As i need some money and a bit more space right now i decided to sell my DVT3.
The console has some marks of usage, a few scratches, (sadly) some small dents on the metal jewel and has been opened by me. I'm the only person who had this kit open by now and i only opened it to remove the clock cap to have this nice kit safe! The kit does still have the Microsoft Asset Tag on the underside.

It's an early DVT3 revision that has an extra header between the cpu and fan. The motherboard does not even have a model number! The Gameport/USB hub is a lot different than retail (see pics below) and the Hardware of this kit is in awesome condition.
It has a different and very cool boot up anymation that i never saw before! And sports an MCP X2.
"Normal" DVT4 or debug kits have an MCPX X2. It does also have the Prototype markings all around the case.
Interesting is also that the GPU Heatsink is the one of a V1.1 and not the v1.0 version with the fan.

About the JVS/USB port discussion i just want to throw in the information that all the connector on this kit are marked "USB" and the color code of the cable matches the USB standard. Haven't meassured if the part has a USB signal connected or if they only used the same color combination.

I filmed the boot up process for everyone who's courious about it.
And i also took quite a few photos while i had this kit disassembles. Below are only a few examples.

The SDK and Recovery set is in good condition and fully working working.
It is the August preview 2001 for beta Hardware. The kit is currently running 1.00.3723.1.

->The Lego Drome Racers beta is not part of this sale and will be deleted from the Harddrive before the kit will be shipped out! On another note it is not a DVT3 application and will only run on a DVT4 or debug kit. Well modded retail would off course also work.
->The DVT3 has a 240v PSU installed and would need a Step-Up converter to work in the USA. The PSU is also a prototype revision and does a short beep when plugged in. It seems to be different to retail as the console needs to stay turned off for a few seconds before it can be booted up. Otherwise it sometimes only shows a black/grey screen. I guess this happens if the capacitors aren't fully discharged that there's a reset problem.
The complete
I would sell the complete set consisting of DVT and matching SD/recovery set for 700$-600$ 500$+shipping

The complete set of Photos can be found here:
https://mega.nz/#!QkEXSLpR!jplHgXappgBji0yWUyphA-phAIhe-o02vTze_wnSBlg
And the boot-up video here:
https://mega.nz/#!R4tjDZyS!xsyn5Y-35LolhisQe0nAWre5ZtTpY3_wLCEiRhu7Yag




The Dakota Controller has been sold!
Next is a Dakota Controller for the Xbox classic.
The Controller is in an almost like new state and does really not have any real signs of usage.
It comes tested and includes the original Breakaway cable that is needed to use it.
Price for it would be 160$+shipping.

 

I have an identical early DVT3 that needs that USB/Gameport card labeled ES-1 in the last picture, top part.

Is this an extra one that could be sold or did you remove it from your dvt3 for this picture? If so, can you take front and back high res pictures of the ES-1 Usb card.

 

@Syclopse i sent you a PM about the USB/Gameport card. Sadly i only have the one that is installed in this kit.

@All if my price is way off just let me know. I'm also open to offers so don't be shy i want this DVT3 to get a good new home!

 

Awesome pictures of the unit, odd to see "Low Jitter Required" on the bottom of the case and Low Jittor sticker on the motherboard.

 

If I had the money.......

 

@XboxSurgeon you can drop me a PM with an offer if you like and i could keep it for you for a while if you want to buy it later.
Would match good to your DVT4!

 

Price drop to 600$ +shipping.
The international shipping isn't all that expensive as some of you guess.
And i would be willing to split the DVT3 from the Recovery/SDK set if you only want one of the both things!

 

Final price drop on the DVT3 and added my Dakota Controller!

 

I cant believe this hasn't sold. Xbox market slowed to a halt all of a sudden.

 

Christmas taking up too much funds lol

 

what type of currency are you using to sell the xbox?

 

Yeah, that's where I am is Christmas plus I'm in the midst of moving. I'd do this if I had the cash....

 

Mainly development stuff, I thought I'd clear those things out first. It was all retail stuff...

 

@thepokemask the currency is in USD.

Thought it would sell faster too. But christmas is really taking up a lot of cash!

 

The DVT3 and Dakota Controller are still for sale. Come on guys!

 

I have no money.. would have got the DVT3 for sure... cause that hardware is sexy. totaly worth it. Probably should not post this.

So it is USB afterall
That connector, it apears to say ITP (internal test pin ?) Im still thinking that it is a cpu/gpu or similiar debug thingy connector.
The usb seems to go straight to the MCP X2 (Ow that IC would be Sweet to have... cause collectors )
Now would newer mcpx also have this usb port? (ill continue somewhere else, future buyer should enjoy this )

 

Totally forgot to update the thread.
The Dakota Controller is sold and the DVT3 and Recoveryset are still avaylable!

 

I ask here, cause low on money, but if your going to do the terrible idea off splitting the Recoveryset from the DVT3, how much should one consider to give you?