FS: Mods and Service in USA and beyond!

SERVICES

All cost are quoted in USD shipping to and from me is not included. Shipping cost should be the same bolth ways. Discounts on multiple repairs or mods / systems sent at once.

NEO-GEO

Neo-Geo unibios 3.2 + for AES install only service with chip $50 chip in socket


Nintendo

NESRGB $135 installed with mini din Add $20 for scart cable euro or jp
NES Top loader $140 installed with mini din Add $20 for scart cable euro or jp
Famicom RGB $155 installed with mini din add $20 for scart cable euro or jp

Famicom AV RGB $140 installed with mini din Add $20 for scart cable euro or jp
Sharp Famicom Twin RGB $150 with disk drive repair,cleaning and tuning. Includes RGB out from existing din output. Chose your output to Duo,neo,sega and use your existing cable or $20 for scart cable



NES Component out with Viatim NESRGB $185
SNES Component out depending on system $45-75
SNES Jr. AKA mini component mod $75
N64 Component mod $75 on RGB systems and Beyond expensive on non RGB systems



Turbo Express, PCE GT Recap repair with ceramic capacitors $55


Turbo Duo , PCE DuoRecap repair and laser scope $75 (New laser add $25)

PCE DUO, DUO-r / RX LED change $10 led only or $6 with any other mods or repair

HU-MOD Region free HU game play on any TG16,duo,duo-r/rx. Express, GT $65

RGB or component mod Turbo,duo,PCE $75 ($20 if scart is required)
Laseractive PAC-S10 Sega recap 99% replacement of capacitors with ceramic SMD $109 including a new
battery with a new ez swap (1% is standard radial capacitor due to the cost of ceramic is $65 for just one cap)


Laseractive PAC-S1 NEC Turbo / PCE recap 100% replacement of capacitors with ceramic SMD $80


Sega Nomad recap with ceramic $45
Nomad LED mod $50




many others just ask
All Systems come with 90 day warranty! Shipping and repair are fully covered for first 60 day's. Shipping after is half and half, parts and labor fully covered. Removal or defacing tamper seal will void any warranty.

 

All sales threads must have validation photos, as per the rules.

Where you're selling chips / mod board, you need to have a validation photo of the chips / boards. I appreciate it's difficult for a cap job or mod, but a validation photo showing your handiwork would be best, and will reassure people you're competent with a soldering iron.

Please update the first post with validation photos within 24 hours.

 

Will add heavy photos tonigh. And many more mods

 

And done for tonight will add more soon

 

Much appreciated - thanks!

 

My pleasure

 

Do you do the RGB/component mod for PC Engine?

 

can you do snes 1chip full recap and fix the veritcal bar problem and do super cic?

 

Sure can but it's a tight fit.

 

Going full bore. I've done the common vertical fix many times over. Recap snes have only done once as a preventive matnice.
Cic have not done but definitely not out of my ability. I'll have to go through my chips and see if i have the correct blank.

 

Estimate on price at all?

 

How much to add Component to a Non-RGB N64?

 

Do you have any other photos of the Nomad modification? Is the LED on the left, or the right of the photo you posted?

 

Do you mind changing your font colour to white please?, now the theme is defaulted to black its kinda hard to read

 

do you repair sega cdx? i got 2 that a simple laser replace didn't fix

 

Don't forget you need a validation photo for each mod/console you offer (one "fully loaded" shot per console would be fine if there's more than one mod).

 

Might be interested in the Nomad mod.

 

Did anyone ever get a mod done by crans, or hear back on inquiries? Weird that he just stopped replying to his own sales thread.

 

Im back and going at it full time. No more delays my priority is your happiness. Mail in or drop off in Los Angeles, services can be done on sight if you have the time to watch.

 

i would love to do it on the interface or a duo but cost would be the same for any model $75 add $20 if you need scart cable