Install PS1 ModChip into PS2

apexseal make a good work indeed. but like you said pal consoles dont trigger antimod. and a sleeping chip means no swap example metal gear it didnt give you save before swap

 

that's good to know, although his last release had it where it constantly sends the code but 90% less than the orignal would that one be ok? assume with apexseals version you need to lift the resistor and join the 2 points?

 

nvrmind

 

im using internal instalation with external switch. im taking the +5 gnd from the usb solder points without removing the resistor. but i solder pin 6 in the sx point of the motherboard. see modbo install diagrams to find the sx point of your motherboard

 

hmm, which usb points exactly?

 

the one that usb dongle is soldered

 

It's all in the original thread from page 6 on... Yes the last one I made does keep on sending the code but less times per minute way less... For external install keep in mind the 1-4 jumper. If doing internal I would suggest connecting RST point to pin #4.

 

@karenjan99 did you figure it out?

 

no im have problem wit programmer, but now i want install modbo i know it hard but best way to play ntsc ps1 games on pal ps2

 

if you only want psx backups then the 750x mod is still the best and easiest. only 4 wires.

 

yes but one problem, my console is 50003(pal) and it run ntsc ps1 games only in pal
im like ntsc for more fps and nice colors) and there is only one way run ntsc ps1 games in ntsc mode (modbo )

 

if the backup is ntsc it will run at 60hz. you dont need modbo

 

all my ntsc games run in pal 50hz using swap method
original ps1 pal game--->ulaunchelf--->swap with breaker pro--->psx launcher--->ntsc game
i can get only pal 60hz (not ntsc) using ps1vmodeneg.
original ps1 pal game--->ulaunchelf--->swap with breaker pro--->ps1vmodeneg--->ntsc game

p.s. and guys says this is not region free modchip. i can only run pal games with this mod and it means that in any case I must use breaker pro to launch ntsc backups

 

Um, but isn't that the reason ps1vmodeneg exists?
With some methods of playing ps1 imports on a ps2, the video mode is determined by the region of the console. Rather than the game.

 

yes you are correct, i was wrong