Interested in latest NGC ProDG?

I would love to, but at the moment I don't have everything installed needed to work with it :S

 

I'll give it a try tomorrow, got a day off and what I planned to do with said day won't be happening due to hardware incompatibilities!

 

And... *drum roll* Results:

It's obvious I haven't used the GC SDK in a few years, didn't really have a clue what I was doing. Target managed connects but keeps moaning it can't get the current status, I've had it running a program and it appears to work. Tried debugging an elf using the ProDG debugger and not sure if the problem is with me, the hardware, the software or the patch but output said it was waiting for the debugger so I loaded up the debugger and it was on a breakpoint (no breakpoints were set). Clicked start and it ran through the program and output the controller status (Strangely, port 4 doesn't work for some reason. Oh and it's interesting to see the difference between a decent high quality 3rd party controller such as the mad catz one which I bought from a member here the other year VS a pretty nasty cheap knock off controller, analogue on the mad catz goes from -100 to +100, analogue on the knock off controller goes from something like -80 to +78). And it ran until I clicked stop, and then you can manually step through the program... This is where it gets a bit strange, after about 8 steps, the debugger locks up. :S. Step over and step through function don't do anything (Either that or I don't have them set properly).
Anyway to cut a long story short, yes it does appear to work! Nice work Bad_Ad!

 

You said you had a valid license, right?

Try my patched version and try the unpatched with legit license and compare behavior

 

I was trying, was a bit confusion though, had to keep setting date back 3 years and renaming multiple licenses and rebooting the PC, for some reason it kept freezing whenever I opened k!tv to see if it was outputting anything and it takes a while to start up so in the end I gave up and just turned it all off haha. Had a bit of a clear up and now it's time to do uni work, another day I'll try again.

 

No worries!

Bad_ad - nice work! I'll keep this for when I finally get some kit!

 

Do you still all the GC stuff you had upload in 2013? The link doesn't work anymore.....

 

Yes it does.

 

The last zippyshare link posted by splith doesn't, only the patched ProDG uploaded by BadAd.

Does anyone still have the other files?

 

Couple years late but you or someone else may still want this. https://mega.nz/#!dtUiyQCQ!rMq_y-kDPZaD4ka5UjFXIj3gdvhu86MjnRAdr55Gops

 

Is that ProDG for GC ? If yes, A REAL BIG THANKS !

 

Yes, but if you want to make use of it you probably want the cracked version that was reuploaded here http://assemblergames.com/l/threads/npdp-carts.61545/page-2#post-883525
edit: didn't notice you were the one asking for it in that thread haha

 

I got the patched version too. Thanks !

 

I just want to say, thank you so much for uploading this, I've been looking for this for years.