Lordsvale MVS Coin Mech help

So after noticing the Diode had also blown I have replaced the following;

Diode - £0.09
5V Regulator - £0.60
IC Chip - £0.38

The diode had taken out two traces so I have repaired them with some IDE ribbon cable

And guess what it now works I even have voltage going to the little bulb at the coin slot.

12.1V going in 5.03V coming out

Accepting coins and adding credit.

Thanks for all the help guys

 

Good job! Lucky nothing else went. Enjoy it!

 

Well done - I have to say I think you were lucky, though. When you said you had 12V on the output of the regulator I was fully expecting that 8748/9 to have been blown up. Maybe the blown track stopped the power from getting to it.