PSX Japanese version of the host can't direct reading?

I'm trying to burn the Mayumi v4.0 and MM3, microcontroller using 12 f675, 5501 available, 7000 cannot run, 7501 available, 9002 available, PSone 102101100 (PM - 41, 2 PM - 41), are not available. These machines are being added a direct reading of the chip, but need to replace direct reading, open the "invisible" function.

My idea is that any direct reading program can be, as long as there is "invisible" function.

Please give me a, thank you.

I come from China, where the American, Europe, the hosts are large inflows to the Japanese version here, I can be sure, the Japanese version of the host without replacement on the BISO, interregional running can be realized, backup game, but because of s too long, the direct reading is not "invisible" function

 

The short answer is that the Japanese units and the PAL PSone (SCPH-102) have an additional region check in the Boot ROM, which will allow only discs from the correct region to boot even if a mod chip is installed.

All other models (All US or Asian units and all PAL units except the PSone) will boot discs from any region once you install a mod chip.

For the PAL PSone, there is a special chip that has the patch for the boot ROM ("OneChip"), but I don't know of any equivalent for the Japanese machines.

简单来说所有日本机和 PAL PSone (SCPH-102) 在 Boot ROM 时需进行额外的区域确认，且只允许正确区域内的CD盘运行，哪怕是已安装了直读芯片。

所有其他机型（包括美国或亚洲机，和所有非 PSone 的 PAL 机）只要安装了直读芯片，则都可以运行任何区域的CD盘。

针对 PAL PSone，有一颗专用的直读芯片叫 "OneChip" 可以改写 boot ROM，但我不清楚日本机有无类似的情况。

 

很感谢你，这位朋友，把中文也打了出来。
我试过很多款PS1机，5501和9002加入Mayumi v4.0 和MM3 都是可以正常工作的，也可以正常启动隐形功能，但在PSone101和102确不工作。
发布的程序里，也包含了日版的程序，我烧录了直读后，安装在7000和PSone100，不正常工作。具体情况是，日版机不可跨区运行别的游戏，但可以运行日版的备份游戏。同理欧洲版也是，在9002上可以正常工作，但102上只可以运行欧版的游戏。我观察了读盘的情况，在SONY菱形标志的时候，光驱电机是加速运转的，但不会出来PLAYSTATION画面，进入的是管理画面，只可以听CD。
由于我们国家对google封锁，所以我找直读的程序，很麻烦，经常打不开国外的网页。
希望我的描述够清楚。
期待你的回复，谢谢。（现在我们当地时间是晚上22:13）

Thank you very much, my friend, the Chinese also played out.

I've tried many PS1 machine, 5501 and 9002 to join Mayumi v4.0 and MM3 can be normal work, also can start the stealth function normally, but the PSone101 and 102 doesn't work.

Release program, also includes the day version of the program, I burn the direct reflection, installed in 7000 and PSone100, don't work properly. Specific situation is that the Japanese version shall inter-district run no other game, but you can run a backup version of the game. Similarly the European version, too, can work normally in 9002, but only can run on the 102 euro games. I looked at reading the disk, when SONY diamond logo, drive motor is to speed up the operation, but not the PLAYSTATION, is entering management screen, can only listen to the CD.

Due to our country for Google blocked, so I find direct reading program, very troublesome, often can't open foreign web pages.

I hope my description is clear enough.

Looking forward to your reply, thank you. (now we is then in the evening local time)

 

对了，我用的单片机是12F675。我不知道是不是这款单片机，对某些PS机不支持？从机器上拆下来以前的直读是12C508
By the way, I am using single chip microcomputer is 12 f675. I don't know whether this single chip microcomputer, for some PS machine does not support? Removed from the machine before 12 c508 direct reading