F/S Nes Top Loader SNES Style Multi A/V Socket

I wanted to, but the cable I was using ended up being too tall and wouldn't fit under the heat sink. Had to desolder the pinheader and just wire directly to the board. Pin header is great on paper, but doesn't seem to be best case when it comes to actually doing it.

Now, if you also included a custom cable that fit into the pin header, fit under the heatsink, AND was wired perfectly for another pinheader soldered into the nesrgb's row of through-holes... That would be worth including. :encouragement:

 

That must be it Looking for the panel mount sockets.

 

I have 2 Wii screw sockets if you're interested but non of the SNES screw sockets.

 

Hey Helder, any ETA/idea on more SNES sockets?

 

Might be a few weeks but likely sooner.

 

I have 10 of the screw sockets available with 2 reserved for someone, so now there is stock of both the full and screw sockets.

 

Helder, do you have the coloured screw mounts in stock or just the white?

 

I have 2 options for the socket in either white or colored, links are on first page. I have 3 sockets left so if you want one..... or 3 then better hurry.

 

2 left of the screw sockets.

 

Paid for one coloured screw mount kit

 

Came out really nice, I got almost a mm gap along the lower edge, could have sanded down those holders a bit but I wasn't up for taking it apart again when I noticed.
Looks really good there in the shadow even though it's bright white.

 

You could always use some vinyl dye spray paint to get some color on it but to find an exact match is real difficult since the color options are slim. Glad you liked it.

It's on it's way there, look tomorrow for shipping info.

 

Aw... I need to check this thread more often. I'd need 5 screw sockets and 1 or 2 full mount kits...

 

I have plenty of full mount kits but only 1 screw socket left, I will have more late next week.

 

I have stock of the Screw Mount kits and still have stock of the Full Panel Kit as well.

 

What kit do i need if i want to use it on my front loader pal NES i want to buy this before i buy the nesRGB (when its in stock again) so i have this ready when it comes back in stock

 

Front Loader you will want the Screw in Socket (the cheaper one) which comes in the color white like the pictures but I can also dye it to a more system matching color. Links to all sockets are on the first page.

 

I tried to purchase a full panel mount and it says it is out of stock. Any chance of an estimate of when it will be back in stock?

 

Early to mid next week I will have more stock.

 

Awesome!