indi 5003

hey someone told me i can edit the ind-bios.cfg file to run my fan at always 100% incl in GAME
because i have a 1ghz xbox ,problem is i cant find the file
my xbox is tsop with indi bios 5003 1ghz 2tb

 

solved ! just made a cfg file my self and copyd this code / to C: /
480P=1
RESETONEJECT=0
USEUSEALLMEMORY=1
IGRMODE=2
IGRLOADSDASH=1
AVCHECK=0
NOSOUND=1
IFILTER=1
FANSPEED=100
DISABLEDM=1
LEDPattern=OOOO
AUTOLOADDVD=1
CUSTOMBLOB=0
INTRO=0
SHOWFLUB=0
FOGON=0
XLOGOSCALE=100
TEXTSCALE=100
XLIGHTCOLOR=0xFF0000FF
SKEWEN=1
YSKEWLOGO=-20
XSKEWLOGO=0
YSKEWXLOGO=-19
XSKEWXLOGO=0
YSKEWTEXT=15
XSKEWTEXT=0
XINNERCOLOR=0x74BE10
XBOXCOLOR=0x74BE10
BGCOLOR=0x000000
TMS=0
NOLIGHTEN=1
IND3D=0
SHOWXEN=1
SHOWMSEN=0
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
CUSTOMBLOB=\Device\Harddisk0\Partition2\Ind-Bios\Custom-Boot-Logos\flubber.x
CUSTOMLOGO=\Device\Harddisk0\Partition2\Ind-Bios\Custom-Boot-Logos\mslogo.bmp
CUSTOMX=\Device\Harddisk0\Partition2\Ind-Bios\Custom-Boot-Logos\xlogo.x
CUSTOMTEXT=\Device\Harddisk0\Partition2\Ind-Bios\Custom-Boot-Logos\text.x
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;Test Paths
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;CUSTOMBLOB=\Device\Harddisk0\Partition2\Ind-Bios\Test\flubber.x
;CUSTOMLOGO=\Device\Harddisk0\Partition2\Ind-Bios\Test\mslogo.bmp
;CUSTOMX=\Device\Harddisk0\Partition2\Ind-Bios\Test\xlogo.x
;CUSTOMTEXT=\Device\Harddisk0\Partition2\Ind-Bios\Test\text.x
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
DEFAULTXBE=\Device\CDrom0\Default.xbe
DASH1=\Device\Harddisk0\Partition2\evoxdash.xbe
DASH2=\Device\Harddisk0\Partition2\xboxdash.xbe
DASH3=\Device\Harddisk0\Partition1\TDATA\RescueDash\default.xbe


now my fan speed is running 100% ingame so it keeps my 1ghz xbox nice and coell

 

So just edit the line that says "FANSPEED" to whatever you want, gotcha!

 

No not what you want.

It's between 10 - 50

10 = 20% (default fan speed)
50 = 100% (jet engin if using the default fan lol)

Anything below 10 could cause heat issues, if using a stock fan.

 

Then OP's config is wrong cause he has it set to "FANSPEED=100" up there.

 

Never noticed that lol, it's my config I put it in a post on another forum & set it to max fan speed for him.

But guess he though 100 was max, even though I told him 50 was :/

 

No mention of the ind bios configuration tool?

Boom, fan speed.