new freeboot unsigned xex's and more

Working on it this tower is a hunk of slow PoS

ETA 20 mins for pics?

 

What is it you'd like to try? XeXMenu won't be too much longer.

 

Um I don't even know what to say to that, I mean the 3 330 ohm resistors are um just not good. I mean the wires can be cut. and will need to because that looks like a mess. I can see why the cygnos had problems. But I mean the bright side is you got it working so....

 

Ok,I got a DB25 connector,I took it from a old lpt cable.


Now I just to need to look around for a DB25 male to female cable,I think I have one around the house.

 

Cygnos was fine it was when I desoldered it when the prolems came about. The solder joints are fne, as a matter of fact the wires are actually down inside the board an I relayed the solder myself:thumbsup:

The 330 ohm resisters are because well I don't rightly give a damn right now and did not want to deal with crossing wires so I used the legs to seperate them. Like I sad ghetto rigged. The legs just make distance doesn't effect the wires in any way. Only poblem I am having is I used total commander and its saying 60 - 63 are different but I honestly don't think its crucial informaton because every other program reads the NAND fine.

 

How many reads did you take, and have you got this working yet it's been like 2 hours so you should of by now at least anyway.

 

Yeah I'm done. Reads were fine everything was good the compares said they were bad but I think it has to do with the newest version of total command because the area it said it wasn't the same... was the same when I manually checked the hex and compared it, so... Yes it works and I would like the thank. Hawk, hl, and a little bit of everyone else that assisted me with part recommendations. I'm reading to get started on testing now so I need to talk to a few people who are probably asleep... At anyrate I'm about to test if modding on live works with a spare account. If it does lets hope microsoft gets this patches asap with an instant ban system now that the new exploit reads replaced kv.

 

If done correctly modding on live will work, I'm sure the halo xex's allow for modding but Bungie should have the ban hammer for that, but IDK about COD. What are you planning to mod on?

 

What I'm known for

Halo 3. I'm just going to run a few modified maps and see if the console gets flagged. This is just a project I'm doing in my freetime. Also I will be doing it from a Live file from the hard drive and hope it gets picked up, I have no disc drive so this is all just to motivate me to figure out how I'm going to do all this. Then tomorrow I will be doing some testing for some people who PM'ed me with things to test. Right now I must concentrate on how to make a full game show up on the dash in Live/pirs file...

 

I'm sure you have theloader, just put it on a usb HDD and run it that way.

 

Yes it was given to me as part of testing, however I don't have a usb device that can hold 6 gigs... However I modded this itouch to use it as a hard drive once... Hmmm.

 

so in short what is so great about this all?

you need to open and mod your xbox... there's chips around since a long time for that... It doesn't allow for free homebrew, so please people clear up my mind

 

Who the fuck gave you that, and who are you testing for?

Because it's not us.

 

There has never been really any homebrew on the 360 prior till just a few days ago. It allows for homebrew to run, hacked 360 in the past only allowed for blank media booting.

 

As a matter of fact I was contacted by some of your people and I was given software to test. I'm not giving any names because I'm not about to throw anyone under the bus but yes I was given this software. Might I mention your post seems a little agressive and unessessary? I have been doing this kind of stuff for a while so before you flip shit know that I can provide people that will tell you I am trustworthy and have been doing this for a while now. I'm not some noob with one of your toys.

Also for the record boot with theloader = E71 for me, Just letting you know.

 

You dont have to have a chip some people recommend the cygnos v2, others say just use XBReboot as it does the same thing. What do you mean by free homebrew? This allows for any xex to be ran from the console. Plus it works on live for the time being. Arcade games are unlocked, it runs dev content without any modding.

I would even venture to say that for the average user a hacked retail is 100 times better then a dev kit. Hacked retail = LIVE, Homebrew, runs retail and dev signed xex's without any modifications unlike on a dev you can't just put in a retail game and run it but with this you can put dev content and run it. Games and content from pnet work as is.

The only difference is the debugging stuff. And well most people that will worry about that already have devs, and those that don't will be able to pick them up way cheaper then they where a week ago. Nobody will pay $1000 anymore to mod halo on a dev when they can do it on a retail and on live unfortunately, sorry to break that news to everybody, well not really but still.

There are way more exploitable retails out there then there will ever be devs in the wild. It's been a long time coming but finally here, give me HD codec support and I'll be happy. I don't care about the free games nearly as much as I want HD video playback, rather it be XBMC or a codec inserted into the kernel I don't care, but it shouldn't be long and somebody will do it, and at the rate this hacks going it won't be long it was just 4 months ago when the whole xell thing popped up now look at the scene.

 

Explain this how are you trying to boot? If you boot with a USB and have any default.xex on a usb stick it will e-71 everytime.

 

I was given no notes other than to boot from usb 0 - 2 and only have the default.xex on the drive. Beyond that I was told nothing else.

 

Wow um ok, let me explain this, A you have a really old version of theloader that will not work anyway if it doesn't have the settings.xml ect. B you can't just boot theloader from a usb drive since the kernel doesn't look for it to boot the way your trying too. C it has to be from the dvd drive or from a live container from your HDD or memory card. D um are you sure you have THELOADER and not XeXloader or XEXMENU? E either way they have to be ran from a live container or from the dvd drive.