Dreamcast BIOS chips (MX29LV160TMC-90)

But how do i transfer through paypal,do you send my details through email,its so unclear..
nobody sells this and my dreamcast bios is tottally messed up i think this would fix it.

 

Its not unclear, the thread says

Quite clear I think?

You asked a question about payment, which until resolved you cant place an order - thats why you have not been pm'ed.

Paypal echeck is fine, just wont be shipped until its cleared.

 

ow your right,
damn i overlooked it
ill just wait then till you send me your details
do you happen to know the shipping costs ?
thanks in advance

 

Received! Thanks a lot

 

Can you pm me with the details please?
im ready to pay you,and ill pay extra
but you have to send it SAP im sorry if i dont understand everything
I want 2 normal 1 preflashed.
Also,If i install the preflashed,Then i can flash bios with dev kit dreamshell?
Can i ask you a few things with a pm please?
ill pay 5,50 euro,thats 7,18 dollar
also can you tell me what the shipping costs are to the netherlands?
cause i cant find it on google.ill pay immediately after you pm me.
thank you in advance im having lots of trouble with my dreamcast :banghead: ..

 

2 blank is £4, pre flashed is another £2.20

thats £6.60 without shipping,which is another £2. Total being £8.60 which is less than you are "offering".

Also, "I have to send it ASAP" - sorry, this will not work for me. Its the holiday period, nothing will be shipped until the new year.

 

oww okay..well its still asap i guess ..
next year will be fine,But i would like to stransfer the cash to you now,if you receive it before next year,thats fine.it would speed things up. if thats okay with you
Also i was confused with dollars,silly me
tyvm

 

Okay if you do decide to pm the details,
I will deposit 10,40 euro,
wich is like 8,70 pound
and do you have time for me to answer some questions?
Like what bios is on the preflashed,can i replace the old chip with your preflashed without having to use dreamshell, Can i still install the devkit with the new swirl startup?
google wont give me all the answers

 

I'd like 2 blank chips within the UK, thanks.

 

I'll take 2 chip pre-programmed please shipped to canada (ordering saturn bios at the same time.). Thanks

 

Many thanks

Chips arrived in the post this morning... Now where did I put that soldering Iron.

 

I'd like to buy 2 pre-flashed chips please. I'm in the UK and can pay via PayPal. Ready to pay whenever. Thanks.

Make that 3 pre-flashed ;-) .

 

Safely received them today, cheers Bad_Ad84 :thumbsup:

 

Bad_Ad84,

I'd like 2 pre-flashed chips, shipped to Canada. PayPal

Thank you, and Happy New Year.

 

My 3 chips arrived this morning. And very well packaged :thumbsup: . Thanks Bad_Ad84.

 

4 more please (2 Blank and 2 programmed)

Thanks

 

Hi, i want 1 blank and 1 flashed free region dreamcast bios chip to Russia.

 

Thank you very much, Bad_Ad84.

Got the chips yesterday, at least one of them works great.

I managed to kill one DC motherboard (not a huge loss, since a bare DC is ~25 bucks, plus shipping, plus wait time), while removing the existing BIOS, so I don't know yet about the second one, but I expect it is fine as well.

Ok, folks, don't repeat my mistake. The reason mmonkey tutorial says that you solder the new chip onto the existing one, is because it is hard to desolder the original one without proper tools. So if you get the flashed BIOS chip, and don't have the hot air gun, you can use snips to cut the legs of the existing Sega BIOS, remove the chip, and then desolder the legs one by one. But, if you do that, **be careful not to destroy the pads, to which the chip is soldered**. That's what I did, because I was impatient.

Once again, thanks alot, Bad_Ad84.

Is it customary for this board to leave feedback for transactions somewhere? If yes, could someone PM me the particulars?

 

Yes,

Please see this thread:

http://www.assemblergames.com/forums/showthread.php?t=33734

 

I'd like another 2 pre-flashed if still in stock.